Sample; Snmp Mib Event Owner - HP MSR1003-8S Command Reference Manual
Msr series network management and monitoring
Hide thumbs
Also See for MSR1003-8S:
- Installation manual (46 pages) ,
- Configuration manual (400 pages)
Table of Contents
Advertisement
snmp mib event trigger
•
•
test
sample
Use sample to specify a sampling method.
Use undo sample to restore the default.
Syntax
sample { absolute | delta }
undo sample
Default
The sampling method is absolute.
Views
Trigger view
Predefined user roles
network-admin
Parameters
absolute: Specifies the absolute sampling method. Use the current sampled value.
delta: Specifies the delta sampling method. Use the difference between the current sampled value and
previous sampled value.
Usage guidelines
For delta sampling, obtain the difference between the current sampled value and previous sampled value
as follows:
If the object value is UINT type, use the larger value to subtract the smaller value.
•
If the object value is INT type, use the present sampled value to subtract the previous sampled value.
•
Examples
# Specify the absolute sampling method.
<Sysname>system-view
[Sysname] snmp mib event trigger owner owner1 name triggerA
[Sysname-trigger-owner1-triggerA] sample absolute
Related commands
snmp mib event trigger
snmp mib event owner
Use snmp mib event owner to create an event and enter event view. If the event exists, this command
enters event view directly.
Use undo snmp mib event to remove an event.
Syntax
snmp mib event owner event-owner name event-name
251
Hide quick links:
Advertisement
Table of Contents
