Display Poe Interface - HP MSR1003-8S Command Reference Manual
Msr series network management and monitoring
Hide thumbs
Also See for MSR1003-8S:
- Installation manual (46 pages) ,
- Configuration manual (400 pages)
Table of Contents
Advertisement
PSE ID
Slot No. SSlot No. PortNum
4
7
Slot 2:
PSE ID
Slot No. SSlot No. PortNum
43
Table 21 Command output
Field
Chassis 1
Slot 1
PSE ID
Slot No.
SSlot No.
PortNum
MaxPower(W)
State
Model
display poe interface
Use display poe interface to display power supplying information for PIs.
Syntax
display poe interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
If you do not specify an interface, this command displays power supplying information for all PIs.
Examples
# Display power supplying information for GigabitEthernet 2/0/1.
<Sysname> display poe interface gigabitethernet 2/0/1
PoE Status
1
0
1
4
10
4
MaxPower(W)
1
200
8
200
MaxPower(W)
8
200
Description
Information for member device 1. (Distributed devices in IRF mode.)
Information for member device 1. (Centralized devices in IRF mode.)
ID of the PSE.
Slot number of the PSE.
Sub-slot number of the PSE.
Number of PIs on the PSE.
Maximum power of the PSE.
PSE status:
•
On—The PSE is supplying power.
•
Off—The PSE is not supplying power.
•
Faulty—The PSE has failed.
PSE model.
: Enabled
128
State
Model
Off
LSBMPOEGV48TP
Off
LSBMPOEGV48TP
State
Model
Off
LSBMPOEGV48TP
Hide quick links:
Advertisement
Table of Contents
