Communication Ports - Siemens RUGGEDCOM RX5000 Installation Manual
Hide thumbs
Also See for RUGGEDCOM RX5000:
- Installation manual (44 pages) ,
- Reference manual (148 pages)
Table of Contents
Advertisement
RUGGEDCOM RX5000
Installation Guide
Communication Ports
The RX5000 can be equipped with various types of communication ports to enhance its abilities and
performance. Each set of communication ports is part of a field replaceable module that makes switching ports
fast and easy.
Use the ROX II software to determine which ports are equipped on the device. For more information, refer to the
ROX II User Guide for the RX5000.
Each type of module has a specific location in the RX5000 chassis.
Figure 14: Module Assignment
1. Ethernet Module Slot (LM1)
6. Ethernet Module Slot (LM5)
Module Slot (LM4)
Slot Type
SM
LM1 through LM6
CAUTION!
Mechanical hazard – risk of damage to equipment. Do not apply vertical force to the handles on the
modules. Damage to the handles may occur, which is not covered by warranty. Avoid resting the
device on any flat surface where pressure is applied to the module handles.
The following sections describe the available modules and how to install/remove them:
•
Section 3.1, "Serial Ports"
•
Section 3.2, "Switch Ports"
•
Section 3.3, "Copper Ethernet Ports"
•
Section 3.4, "Fiber Optic Ethernet Ports"
•
Section 3.5, "SFP Optic Ethernet Ports"
1
2
3
2. Ethernet Module Slot (LM2)
7. Ethernet Module Slot (LM6)
4
5
6
3. Ethernet Module Slot (LM3)
Description
The Switch Module contains the chassis-wide Ethernet switch fabric
that interconnects Ethernet ports on all installed line modules.
One to six Ethernet Line Modules can be installed in the RX5000.
Communication Ports
7
4. Switch Module (SM)
5. Ethernet
Chapter 3
19
Advertisement
Table of Contents
