Creating A New G Code Program - Siemens SINUMERIK 840D sl Operating Manual
Hmi sl universal
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Program management
8.4 Creating directories/programs
See also
Creating templates (Page 139)
8.4.3
Creating a new G code program
You can create G code programs and then render G code blocks for them in a
directory/workpiece.
Proceed as follows
...
132
5.
Enter the desired workpiece name, select a template, if necessary,
and press the "OK" softkey.
The name can contain up to 28 characters (name + dot. + 3-character
extension).
You can use any letters (except umlauts), digits or the underscore
symbol (_).
The directory type (WPD) is set by default.
A new folder with the workpiece name will be created.
The "New G code program" window will open.
6.
Press the "OK" softkey again if you want to create the program.
The program will open in the editor.
1.
Select the "Program manager" operating area.
2.
Select the desired storage location and position the cursor on the
folder, in which you would like to store the program.
3.
Press the "New" and "G code" softkeys.
The "New G code program" window appears.
4.
If necessary, select a template if any are available.
5.
Select the file type (MPF or SPF).
Operating Manual, 11/2006, 6FC5398-6AP10-1BA0
HMI sl Universal
Advertisement
Table of Contents
