Hitachi CL 10D2 Technical Data And Service Manual page 21

Cordless stud cutter

Hide thumbs Also See for CL 10D2:

Table of Contents

(f) Disassembly of the bracket ass'y

(i) Removal of Bolt (A) [39] (Fig. 25)

Bolt (A) [39] that secures Bracket (A) [42] to Bracket (B) [44] is press-fitted into Bracket (B) [44] and

tightened with the Lock Nut M12 [45]. Hold Bracket (B) [44] with a vise and loosen the Lock Nut M12 [45]

with a wrench (loosening torque: about 350 kg•cm). Supporting around the head of Bolt (A) [39] of

Bracket (A) [42], push the screw side of Bolt (A) [39] with a hand press to separate Bracket (A) [42] from

Bracket (B) [44].

[44]

Hold at these positions with a vise and

loosen the Lock Nut M12 [45].

(ii) Removal of Roller (A) [53] (Fig. 26)

The Roller Pin [54] that secures Roller (A) [53] is press-fitted into Bracket (A) [42]. Remove the Roller Pin

[54] by pushing in either direction with a hand press. Then Roller (A) [53] can be removed.

[42]

Push with a

large hand

[39]

press.

[45]

Fig. 25

[42]

[53]

Fig. 26

--- 18 ---

[42]

[39]

[44]

[54]

Support

here.

Table of Contents