Specifications - Hitachi CL 10D2 Technical Data And Service Manual
Cordless stud cutter
Hide thumbs
Also See for CL 10D2:
- Technical data and service manual (5 pages) ,
- Handling instructions manual (84 pages) ,
- Handling instructions manual (60 pages)
Table of Contents
Advertisement
5. SPECIFICATIONS
5-1. Specifications
Capacity
Number of cuttings per battery charge (M10)
Cutting time
Type of motor
Enclosure
Type of switch
No-load stroke
Weight
Packaging and
packaged weight
Standard accessories
Battery (Type EB 12B)
Battery (Type EB 1230H)
Charger (Type UC 14YF2)
Mild steel studs: M10, M8, M6 or W3/8"
550 cuts powered by Battery EB 1230H
2.3 (sec.)
DC magnet motor
Main body : Glass fiber reinforced polyamide resin
Battery: ABS resin
Charger: ABS resin
Trigger switch with forward/reverse changeover (with brake)
30/min.
Main body
3.2 kg (7.05 lbs.) (includes battery)
Battery
EB 1230H: 0.66 kg (14.6 lbs.), EB 12B: 0.67 kg (14.8 lbs.)
W/Charger
Corrugated cardboard box < W/Plastic case: 6.2 kg (13.7 lbs.)>
Plastic case ............................................................................ 1 pc.
Battery (EB 1230H or EB 12B) .............................................. 1 pc.
Charger (UC 14YF2) .............................................................. 1 pc.
Hex. bar wrench ..................................................................... 1 pc.
M8 cutter ass'y ....................................................................... 1 pc.
M8 trimmer ............................................................................. 1 pc.
Sealed cylindrical nickel-cadmium batteries
Nominal voltage: DC 12V
Nominal life: Charging/discharging approximately 1,000 cycles
Nominal capacity: 2.0 Ah
Sealed cylindrical nickel-metal hydride batteries
Nominal voltage: DC 12V
Nominal life: Charging/discharging approximately 500 cycles
Nominal capacity: 3.0 Ah
Sealed power source: Single-phase AC 50/60 Hz
Voltage: Depending on the order specification
Power input: 44 W
Charging system: Constant current charge with full wave phase control
Overcharge protection system: (1) Battery voltage detection (
Output voltage: 7.2 V --- 14.4 V
Output current: 1.9 A
Charging time: Approx. 60 minutes (for B-type storage battery at 20˚C (68˚F))
Product weight: 1.3 kg
Operable ambient temperature range: 0˚C --- 40˚C (32˚F --- 104˚F)
The maximum allowable temperature of the EB 12B type battery is 60˚C
(140˚F) and the EB 1230H type battery is 45˚C (113˚F).
(in case of Model UC 14YF2)
(in case of Model UC 14YF2)
(2) Battery surface temperature detection
(3) 120-minute timer
Approx. 90 minutes (for H-type storage battery at 20˚C (68˚F))
--- 7 ---
(thermostat or thermistor)
2
V system)
Advertisement
Table of Contents
