Table of Contents
Advertisement
RUGGEDCOM WIN
User Guide
2.
Select one or more SNMP traps from the Traps Table.
Click Send Trap.
3.
Section 5.12.3
Configuring SNMPv2
To configure the SNMPv2c parameters, do the following:
Navigate to Management » SNMP. The SNMP General Settings screen appears.
1.
Figure 70: SNMP General Settings
2.
Click SNMPv2 Configuration. The SNMPv2c Configuration screen appears.
Figure 71: SNMPv2c Configuration Screen
3.
The Current SNMPv2 Status parameter displays the current status for the SNMPv2 system: Enabled or
Disabled.
4.
Configure the following parameter(s) as required:
Parameter
SNMP Read Community
Configuring SNMPv2
Description
Default: public
The SNMP community name for read access. This name can be
used as a password for secure information retrieval. The SNMP
Chapter 5
Setup and Configuration
77
Hide quick links:
Advertisement
Table of Contents
