Four-Chassis Irf Fabric Configuration Example - HP FlexFabric 12500 Series Configuration Manual

Routing

Hide thumbs Also See for FlexFabric 12500 Series:

Configuration manual (402 pages)

Network management and monitoring command reference (320 pages)

Command reference manual (157 pages)

Table Of Contents

Table of Contents

Please input the file name(*.cfg)[flash:/startup.cfg]

(To leave the existing filename unchanged, press the enter key):

flash:/startup.cfg exists, overwrite? [Y/N]:y

Validating file. Please wait.....................................

The current configuration is saved to the active main board successfully.

Configuration is saved to device successfully.

Change the operating mode of Device A to standalone.

[IRF] undo chassis convert mode

The device will switch to stand-alone mode and reboot. You are recommended to save

the current running configuration and specify the configuration file for the next

startup. Continue? [Y/N]:y

Do you want to convert the content of the next startup configuration file

flash:/startup.cfg to make it available in stand-alone mode? [Y/N]:y

Please wait.............

Saving the converted configuration file to main board succeeded.

Chassis 1 Slot 1:

Saving the converted configuration file succeeded.

Now rebooting, please wait...

Device A reboots automatically to complete the operating mode change.

<IRF> system-view