DBS3900 LampSite
Installation Guide
If necessary, request one more person for assistance.
Issue 08 (2016-05-30)
Figure 6-13 Pushing an RHUB into a cabinet
b.
Use a torque screwdriver or Phillips screwdriver to tighten the four M6× 16 screws
with a torque of 2 N•m, as shown in Figure 6-14.
Figure 6-14 Tightening screws
The following describes how to install an RHUB with mounting ears aligned with the
RHUB panel:
a.
Remove the mounting ears on both sides of the RHUB by removing the four M4× 8
screws, as shown in Figure 6-15.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Installing an RHUB
25