DBS3900 LampSite
Installation Guide
Figure 11-23 Installing Ethernet cables
----End
Follow-up Procedure
1.
2.
11.5.6 Closing the Cover Plate of an EXD3902 Cabling Cavity
This section describes the procedure for closing the cover plate of an EXD3902 cabling
cavity.
Procedure
Step 1 Close the cover plate of the EXD3902 cabling cavity. Use an M6 inner hexagon screwdriver
to tighten the screws on the cover plate to 4.8 N· m, as shown in Figure 11-24.
Issue 08 (2016-05-30)
Route the cable by following the instructions in section 11.5.1 Cabling Requirements and
use cable ties to bind the cable.
Label the installed cable. For details, see section 15.5 Attaching a Sign Plate Label.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 (Optional) Installing the EXD3902 and Cables
231