Hitachi Compute Blade 500 Series User Manual page 227
Logical partitioning manager
Hide thumbs
Also See for Compute Blade 500 Series:
- User manual (506 pages) ,
- Management module setup manual (362 pages) ,
- Web console users manual (240 pages)
Table of Contents
Advertisement
up and down arrow keys to select 'Yes', and press [Enter]. The automatic
logic SEL clear function can be changed only when the relevant LPAR is
inactive.
How to enable the processor capping function
Move the cursor over the PC column of the LPAR whose Processor Capping
you want to enable, and press [Enter]. This will open a sub-screen. Selects
'Yes', or Max Service Time and press [Enter].
How to enable the virtual COM console function
Note:
•
When the virtual COM console function is enabled and connected to the
LPAR guest console via telnet, LPAR guest screen connection by using the
[F8] key in the LPAR manager screen is still available. In this case, the
LPAR guest screen displayed on the LPAR manager screen is preceded.
•
If the guest screen cannot be displayed while connecting to the virtual
COM console, check the serial console configuration.
Place the cursor on the VC column of the LPAR line whose virtual COM
console function you want to enable, and press the [Enter] key to display the
sub-screen. Select 'Yes' by moving the cursor with the up and down arrow
keys, and then press the [Enter] key.
As a result, you can connect the LPAR guest screen via telnet. The TCP port
to be used at the connection via telnet can be found in the comment that
appears when pointing VC column of LPAR line or in the sub-screen appears
when pointing VC column of LPAR line and pressing the [Enter] key.
Figure 7-5 Virtual Console Enabling Screen
Operation by LPAR manager Screen
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
7-23
Advertisement
Table of Contents
