Table of Contents
Advertisement
10 | Analog and Frequency Inputs
74 / 160
Physical
(channel)
value
6. Click 'Next' when done.
The third part of the 'Characteristic Curve Wizard' opens.
Physical
limits of
channel
7. Click 'Finish' when done.
8. Enter channel name and description.
9. Click 'OK' when done.
The channel is inserted into the DDU 7 Project Tree.
Channel is linked
to ANA05
Available measurements for channel:
DDU 7 Manual
Characteristic
Adjustment
curve for sensor
is disabled
Input pin Pull-up
resistor is activated
Choose 'Ohm' to
enter datasheet
values directly.
Select physical
unit.
Enter resistance/
temperature pairs
from sensor data-
sheet here (the
3.01 kOhm pullup-
resistor is auto-
matically taken
into account)
Enter physical limits
of the channel
Choose data type of
the measurement
variable
This sensor does not
need offset
calibration
Enter name to auto-
matically create a
new measurement
sheet
Bosch Motorsport
Advertisement
Table of Contents
Troubleshooting
