Disassembly
24
8.
Using the disassembly tool, slide the keypad under the front housing
Figure 10. Removing the Transceiver Board
To Replace the Transceiver Board
1.
Align the front housing over the transceiver board.
2.
Lower the front housing onto the transceiver board and press it into place.
3.
Replace the 2 T-6 screws with a T-6 Torx Plus bit and torque them to 1 in-lb.
4.
Replace the rear housing, USIM, battery, and battery door as described in the
procedures.
October 4, 2004
1
A1000
Front
Housing
6809490A77-O