Removing And Replacing The Battery - Motorola A1000 Service Manual

Gsm and wcdma 900/1800/1900/2100 mhz

Hide thumbs Also See for A1000:

Table of Contents

Disassembly

Removing and Replacing the Battery

Exercise care in handling any charged battery, particularly when placing it inside

a pocket, purse, or other container with metal objects. All batteries can cause

property damage and/or bodily injury such as burns if a conductive material such

as jewelry or keys contact exposed terminals. The conductive material may complete

an electrical circuit (short circuit) and become quite hot.

You must install and charge the battery to use the phone.

Caution: The phone is designed to be used only with Motorola Original

batteries and accessories. We recommend that you store batteries in their

protective cases when not in use.

To Remove the Battery

Ensure the phone is turned off.

Remove the battery door.

Grasp the bottom of the battery from the sides and lift it out of the phone,

releasing it from the tab at the top of the battery compartment.

Tab

Figure 5. Removing the Battery

The Lithium ion battery can explode if replaced incorrectly. Replace only with the

same type of battery or equivalent as recommended by the battery manufacturer.

Dispose of used batteries according to the manufacturer's instructions.

To Replace the Battery

If necessary, remove the battery from its protective clear plastic case.

October 4, 2004

A1000

6809490A77-O

Table of Contents