Router Command; Wan Port Mirroring - Panasonic KX-NS1000 Installation Manual
Pure ip-pbx
Hide thumbs
Also See for KX-NS1000:
- Pc programming manual (1294 pages) ,
- Programming manual (1182 pages) ,
- Manual (542 pages)
Table of Contents
Advertisement
•
When using VPSS, opposing subnets of KX-NS1000 PBXs are automatically configured. However,
subnets created by subsequent external routers are not taken into account.
•
In routing settings for crossing subnets, a maximum of 4 network addresses for adjacent segments, satellite
offices, etc., can be configured for each site. These settings are configured in the VPSS Advanced Settings.
PC Programming Manual References
27.9 Router Configuration—VPN—[3-1] VPSS
8.6.25 Router Command
Description
You can enter router commands from Web Maintenance Console. You can reference the built-in router's
settings in the commands' results.
The following commands are available.
Command
ROUTE
NETSTAT
ARP
DNSFLUSH
Conditions
•
Users with User (Admin) privileges or higher can access this feature.
PC Programming Manual References
7.8.2 Utility—Command—Router Command
8.6.26 WAN Port Mirroring
Description
This feature mirrors the contents of packets sent and received on the WAN interface on the MNT port. With
WAN port mirroring, you can analyze the contents of packets that pass through the WAN port.
You can enable/disable WAN port mirroring.
Conditions
•
Users with User (Admin) privileges or higher can access this feature.
PC Programming Manual References
28.1 Network Service—[1] IP Address/Ports—Advanced Settings—
Document Version 2016-03
Description
Display the connected route information cache.
Display the status for each interface.
Display the ARP table state.
Clear the DNS cache.
8.6.26 WAN Port Mirroring
Port Mirroring—Packet kind for mirroring
Installation Manual
373
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
