Panasonic KX-NS1000 Installation Manual page 179
Pure ip-pbx
Hide thumbs
Also See for KX-NS1000:
- Pc programming manual (1294 pages) ,
- Programming manual (1182 pages) ,
- Manual (542 pages)
Table of Contents
Advertisement
Using Web Maintenance Console in Off-line Mode
You can connect a PC to the PBX to program the PBX using Web Maintenance Console (On-line mode), or
you can program the PBX without connecting the PC to the PBX (Off-line mode).
Off-line mode programming is performed using the Off-line version of Web Maintenance Console, which you
install on your PC. The changes made during Off-line mode are saved as local data on the PC, and then later
uploaded to the PBX.
The following procedures outline how to install the Web Maintenance Console for Off-line mode programming.
Installation
Note
•
Be sure to install the latest version of Off-line WEB-Maintenance Console.
•
Before beginning the installation of Off-line Web Maintenance Console, the following software must be
installed on the PC:
–
Microsoft
®
–
Microsoft .NET Framework 4
This software can be downloaded from Microsoft's online Download Center.
•
To install or uninstall the software on a PC running Windows Vista
8, Windows 8 Professional, Windows 8.1, or Windows 8.1 Professional, you must be logged in as a
user in the "Administrators" group.
1.
Copy the Off-line WEB-Maintenance Console setup file to your PC.
2.
Double-click the setup file to run the installer.
3.
Follow the on-screen instructions provided by the installation wizard.
Note
For information about programming the PBX in Off-line mode, refer to the PC Programming Manual.
Converting KX-TDE or KX-NCP System Data for Use with the KX-NS1000
You can use a tool to convert an existing PBX's system data (DxSYS
Slave unit, and then use that data as the system data (DCSYS) for the KX-NS1000. The following options are
available as the conversion destination (Master unit or Slave unit) for the data.
Conversion
System data necessary for conversion
type
Master data
System data from an existing PBX
converter
(DxSYS
Slave data
System data from an existing PBX
converter
(DxSYS
System data from a Master unit to be used
as the base.
The following figures illustrate the system data conversion process for the conversion types.
Document Version 2016-03
.NET Framework 2.0
)
*1
) that will be added as a slave unit.
*1
5.3 Starting Web Maintenance Console
Business, Windows
®
) for use in a KX-NS1000 Master unit or
*1
System configuration for
post-conversion DCSYS file
Master unit, Stand alone
Master unit with Slave units
Installation Manual
7, Windows
®
179
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
