■2. Menu window for the FX ladder monitor
(1) Display screen
(2) Key functions
Key
[Dev.Sea.]
[Cont.Sea.]
[Coil.Sea.]
Search
operation
[Step.Sea.]
[End.Sea.]
[Xref.]
[16/32Bit]
Display
format
[Dec.Hex.]
switching
[Cmnt.]
Test
[TEST]
operation
Displays the ladder block containing the specified device.
➠
13.6.1 Device search
Displays the ladder block containing the specified device.
➠
13.6.2 Contact point search
Displays the ladder block containing the specified coil.
➠
13.6.3 Coil search
Displays the ladder block containing the specified step number.
➠
13.6.4 Step search
Displays the last ladder block of the sequence program.
➠
13.6.5 Ladder end search
Searches the ladder blocks for the status of continuity/non-continuity of the contact point that
turned on or off the coil on the sequence program.
➠
13.6.6 Defect search
Switches the word device and timer/counter values displayed on the FX ladder monitor
screen to the 16-bit (one-word) or 32-bit (two-word) module.
➠
13.5.1 Display switching of 16-bit (one-word)/32-bit (two-word) modules
Switches the word device and timer/counter values displayed on the FX ladder monitor screen
to decimal or hexadecimal numbers.
➠
13.5.2 Display switching of decimal numbers/hexadecimal numbers
Switches whether to display the comments added to the word and bit devices displayed on the
FX ladder monitor screen.
➠
13.5.3 Switching comment/no-comment display
Changes device values on the screen when the FX ladder monitor is executed. For further
information, see the following:
➠
13.7 Test Operation
Function
13.4 Common Operation
13
13 - 13