250ML Lighting Control Consoles
A and B Master
•
while the B is at 100% at the bottom end of its travel. This allows the execution of dipless crossfades by moving
both sliders in the same direction.
GO
•
- advances the next available cue.
LOAD
•
- allows the preparation for the next cue advanced by the [GO] button.
Programming LCD Display
•
item being programmed or played back. This screen also shows the function of the four softkeys labeled (F1) -
(F4).
Programming Buttons
•
items like Cues and Subs.
Record
•
- command used to store information.
Cue
•
- cues are items to be played back in time and in sequential order.
ON
•
- level of 100%. Example: [1] [ON]
Thru
•
- allows a collection of a range of channels. Example: [1] [THRU] [5] [ON].
0 thru 9
•
- numerical entry key for Command Line operation.
Plus "+"
•
- allows the addition of channels to a Command Line string. Example: [1] [+] [2] [ON]. Also if pressed
without a pre-existing channel list, it will Page Up the channel display. If the Fixture button is selected, it will Page
Up the Fixture display.
Minus "-"
•
This will place 1, 2, 4, and 5 at Full. Also if pressed without a pre-existing channel list, it will Page Down the chan-
nel display. If the Fixture button is selected, it will Page Down the Fixture display.
AT "@"
•
- command that tells the desk that the next numerical entry is a level of brightness. Example: [1] [@] [5]
[0] [ENTER].
CLR
•
- clears the Command Line plus releases channels. CLR will remove the last command entered into the
Command Line. In the event that there is nothing entered into the Command Line, [CLR] [CLR] will release all
Selected Channels (in the Red Box) a third [CLR] shall release all Adjusted Channels (Red Text).
Decimal "."
•
[ENTER].
ENTER
•
- allows the completion of any command entered into the Command Line. Example: [1] [@] [5] [0]
[ENTER], [RECORD] [CUE] [1] [ENTER].
Arrow Up and Arrow Down
•
Untag
•
- This button has multiple functions. It can untag (deselect) fixtures, attribute families or individual
attributes. See Tagging and Untagging for details. Selecting SHIFT + UNTAG allows the user entry in the Setup
pages for system configuration settings.
Home
•
- sets the channel or fixture back to its default position.
Fixture
•
- fixture is the term for attributed luminaires (LEDs and Moving Lights). This button allows access to the
patched attributed luminaires.
Position
•
- allows access to programming for position attributes on an attributed luminaire.
Color
•
- allows access to programming for color attributes on an attributed luminaire.
Beam
•
- allows access to programming for beam parameters on an attributed luminaire.
Effect
•
- allows access to programming for effect parameters on an attributed luminaire.
Group
•
- Allows access to programming a collection of channels or fixtures.
Grand Master
•
Blackout Button
•
- master inhibitive sliders for A and B playbacks. A is at 100% at the top end of its travel
- this small LCD display will display pertinent information based on the active
- these allow for traditional Command Line operation for setting levels and storing
- allows the subtraction of channels to a Command Line string. Example: [1] [THRU] [5] [-] [3] [ON].
- allows the entry of DMX values rather than percentage values. Example: [1] [@] [.] [2] [5] [5]
(adjacent to the small LCD screen) - Allows the ability to change pages.
- an inhibitive master for all outputting intensity levels.
- single button access that will set all outputting intensity levels to zero.
Operation Guide
8
Glossary of Terms