Recording A Palette; Applying A Palette - Philips 250ML Operation Manual

Lighting control console strand lighting

Table of Contents

250ML Lighting Control Consoles

Operation Guide

• If the data in a palette gets changed or updated, then all of the faders and cues are automatically updated.

Recording a Palette

The process of recording a palette allows the storage of position, color and beam information into an easily accessible

state.

The following is the process to record a palette:

Adjust the parameters that are to be stored. The parameter's data will appear in a white box.

Figure 68: Recording a Palette

Note: This screen shot shows the typical parameters of pan and tilt. If you are using color mixing fixtures and

recording color or beam parameters, the attributes will be different.

Press the [RECORD] key. Then press the proper attribute family button (position, color or beam) above the color

screen. The screen shot below show recording position as an example.

Figure 69: Recording a Palette - Position Example

Use Encoder A to assign a Name to the palette. (Note, this step is optional.)

To complete the recording process, press [ENTER]

The recording position(s) will now appear and be accessed by the S keys.

Once palettes have been recorded, they can be access and applied by first selected the fixture(s).

Pressing FIXTURE then S1 key or any combination of the S keys to select the appropriate fixtures.

Now select the appropriate attribute family. Example, press the POSITION key.

Then select the appropriate S key to access the desired palette. The image below shows that two position

palettes have been stored. Position 1 has no name, while Position 2 has been labeled "Chair". The

fixture(s) have been placed in Position 1 by pressing S1 key.

Palettes

Table of Contents

Show Quick Links

Table of Contents