2.1.4
Starting DOS shell and checking the software version
Starting DOS shell
While the PCU is ramping up (after switching the controller off and then on again):
1. Select the Service menu [hidden menu entry] in the Boot Manager.
2. Press key <3>: DOS shell
3. Enter one of the passwords for authorization levels 0 - 2.
Exiting DOS shell
To leave the DOS shell, type "EXIT"..
Checking the software version
The versions of the service menu system components contained in the PCU Basesoftware
and those of Windows XP are listed in file C:\BaseVers.txt.
Procedure
1. Start DOS shell.
2. Enter: type BaseVers.txt
3. To leave the DOS shell, type "EXIT".
Alternatively, HMI Explorer can be activated on the Service desktop.
PCU Basesoftware (IM6)
Commissioning Manual, 10/2006, 6FC5397-0DP10-0BA0
The system prompts you to enter a password:
Result: You are now in the DOS shell.
Result:
The version information is listed.
Result:
The PCU Basesoftware version is displayed on the bottom right of the boot screen.
Configuring the system
2.1 Service menu functions (DOS function)
2-7