Deleting A Route; Figure 205: Create Static Route; Table 187: Route Entry Create Fields - D-Link DWL-8600AP User Manual

Dws-4000 series access points

Hide thumbs Also See for DWL-8600AP:

Table of Contents

D-Link UWS User Manual

Network Address

Next Hop IP Address

4. Click Submit.

The new route is added, and you are returned to the Configured Routes page.

Deleting a Route

Select the check box at the end of the row for the route to delete. Click Delete to remove the selected route.

Specifies whether the route is to be a Default, Static, or Static Reject route.

Packets sent to the static reject route are dropped.

Specify the IP route prefix for the destination from the dropdown menu. In

order to create a route, a valid routing interface must exist and the next hop

IP Address must be on the same network as the routing interface. Routing

interfaces are created on the IP Interface Configuration page. Valid next hop

IP Addresses can be viewed on the Route Table page.

Also referred to as the subnet/network mask, this indicates the portion of the

IP interface address that identifies the attached network.

The outgoing router IP address to use when forwarding traffic to the next

router (if any) in the path towards the destination. The next router is always

one of the adjacent neighbors or the IP address of the local interface for a

directly attached network. When creating a route, the next hop IP must be on

the same network as the routing interface. Valid next hop IP Addresses can be

seen on the Route Table page.

Specifies a preference value for the configured next hop.

Unified Wired and Wireless Access System

Show Quick Links

Table of Contents