Solenoid Valves (Shift Solenoid Valves, Tcc Solenoid Valve And Pressure Control Solenoid Valve); Solenoid Valves (Shift Solenoid Valves And Tcc Solenoid Valve); Solenoid - Suzuki Grand Vitara XL-7 Service Manual

Hide thumbs Also See for Grand Vitara XL-7:
Table of Contents

Advertisement

SOLENOID VALVES (SHIFT SOLENOID
VALVES, TCC SOLENOID VALVE AND
PRESSURE CONTROL SOLENOID VALVE)
REMOVAL
1) Disconnect negative cable from battery.
2) Pull out fluid level gauge and lift up vehicle.
3) Remove exhaust No.2 pipe (1).
4) Disconnect front propeller shaft (2) from front differential.
5) Apply transmission jack (3) and take off rear mounting member
6) Remove engine rear mounting (5).
7) Remove drain plug (6) and Drain A/T fluid.
8) Install drain plug (6).
9) Remove A/T oil pan (7).
10) Disconnect shift solenoid-A valve, shift solenoid-B valve, TCC
11) Remove shift solenoid-A valve, shift solenoid-B valve, TCC so-
SOLENOID VALVES (SHIFT SOLENOID VALVES AND
1. Shift solenoid or
TCC SOLENOID VALVE)
TCC solenoid valve
INSPECTION
Resistance Check
Measure resistance between terminal (2) and solenoid valve body.
Shift solenoid valve and TCC solenoid valve resistance
Standard: 11 – 15 Ω (at 20_C (68_F))
Operation Check
1. Shift solenoid or
D When solenoid is connected to battery (2) as shown in the figure,
TCC solenoid valve
check that solenoid valve actuate with click sound.
AUTOMATIC TRANSMISSION (4 A / T) 7B1-67
(4).
Tightening torque
A/T fluid drain plug (a) : 20 N
solenoid valve and pressure control solenoid valve connector
referring to "UNIT REPAIR" in this section.
lenoid valve and pressure control solenoid valve referring to
"UNIT REPAIR" in this section.
.
m (2.0 kg-m, 14.5 lb-ft)

Advertisement

Table of Contents
loading

Table of Contents