Table of Contents
Advertisement
5.1.9.
Service Mode 9 (System Maintenance)
5.1.9.1.
Overview
This Service Mode is used to maintain and/or update the firmware of the machine.
Use the following procedure for System Maintenance.
Step
1
Standby
2
Press "FUNCTION" and then "7".
3
Press "MONITOR" four times, then press "*".
4
Press "9".
5
Press "START" to update the firmware.
Enter No. or press "\/" or "/\" to select the maintenance
to be performed.
Ex: Enter "2".
6
Press "SET" and "START".
7
Press "SET" or "START".
8
After the backup is completed, repeat step 4 through 6
to request an operation.
9
Press "STOP" twice to return to standby.
Edition 1.0
Service Mode 9
Operation or Unit Condition
194
LCD Display
MMM-dd-yyyy
15:00
00%
SET MODE
(1-8)
ENTER NO. OR
SERVICE MODE
ENTER NO. OR
SYSTEM MAINT. (1-8)
1:FIRMWARE UPDATE
SYSTEM MAINT. (1-8)
2:FIRMWARE BACKUP
FIRMWARE BACKUP (1-3)
1:HOST PROGRAM <4MB>
FIRMWARE BACKUP
* IN PROGRESS *
SERVICE MODE
ENTER NO. OR
MMM-dd-yyyy
15:00
00%
DX-600/800
APR 2002
Advertisement
Table of Contents
Troubleshooting
