3. Preparation for the projector
Plug in the power cord, turn on main power switch and the power of the projector.
Set the Auto input search is off by setting the "default setting" menu.
Select computer 1 input.
How to enter to the Adjustment Mode
While the Volume adjustment bar is displayed on the screen, set value to 2,
and press the buttons,
[Input], [On/Standby] and [Setup] simultaneously.
Repeat the above-mentioned procedure three times.
For your confirmation's sake, press [Return] and [Up] buttons at once.
When the projector enters to the Adjustment Mode, the following menu appears.
If it doesn't appear, repeat from the beginning.
This mode maintains until you turn off the Main power switch.
19