Panasonic DP-C406 Operating Instructions Manual page 5

Hide thumbs Also See for DP-C406:

Table of Contents

Select "01 IPv4".

If DHCP Default is set to "Yes", select

"00 DHCP Default" and change the

setting to "No", and then select "OK".

Select "01 TCP/IP Address" and enter

the IP Address, and then select "OK".

Ex: 192.168.1.111

When entering a 1 or 2-digit number

segment, enter "00" or "0" in front of the

number to scroll to the next segment of

numbers. Press the " " key on the Control

Panel to enter a period after the number.

To correct a mistake, select

move the cursor to the right side of the

incorrect address. Select "Clear" to delete,

and then enter the correct address.

Select "02 TCP/IP Subnet Mask" and

enter the Subnet Mask, and then

select "OK".

Ex: 255.255.255.0

Select "03 TCP/IP Default Gateway"

and enter the Gateway Address, and

then select "OK".

Ex: 192.168.1.128

Select "Close".

The screen will return to step 5.

Table of Contents

Dp-c266 Dp-c306