Frequently Asked Questions - Miele ESW 6380 Operating And Installation Instructions
Warming drawer
Hide thumbs
Also See for ESW 6380:
- Operating and installation instructions (32 pages) ,
- Installation instructions manual (15 pages)
Table of Contents
Advertisement
Frequently asked questions
The following faults can be corrected without contacting the Miele Service Depart-
ment.
If in doubt, please contact Miele.
Repairs should only be carried out by an authorized technician in accor-
dance with local and national safety regulations. Unauthorized repairs could
cause injury or appliance damage. Do not attempt to open the warming drawer
housing.
Problem
The drawer does not
heat up.
The food is not hot
enough.
The food is too hot.
The dishes are not hot
enough.
26
Possible cause and solution
The plug is not properly inserted.
Insert the plug.
The circuit breaker has tripped.
Check the fuse (minimum fuse rating: see data
plate). If the drawer still will not turn on after reacti-
vating the fuse, contact a qualified electrician or
Miele Technical Service.
The "Keep Warm" mode is not set.
Set the correct operating mode.
The temperature setting is too low.
Select a higher temperature.
The air vents are covered.
Make sure that air can circulate freely.
The "Keep Warm" mode is not set.
Set the correct operating mode.
The temperature setting is too high.
Select a lower temperature.
The "Warm Dishes/Plates" mode is not set.
Set the correct operating mode.
The temperature setting is too low.
Select a higher temperature.
The air vents are covered.
Make sure that air can circulate freely.
The dishes have not been warmed long enough.
The warming-up time for dishes is influenced by
various factors (see "Warming dishes").
Hide quick links:
Advertisement
Table of Contents
