Miele ESW 7010 Operating And Installation Instructions
Gourmet drawer
Hide thumbs
Also See for ESW 7010:
- Operating and installation instructions (64 pages) ,
- Operating and installation instructions (60 pages) ,
- Operating and installation instructions (60 pages)
Related Manuals for Miele ESW 7010
Summary of Contents for Miele ESW 7010
- Page 1 Operating and Installation Instructions Gourmet Drawer To prevent accidents and machine damage, read these instructions before installation or use. en-US M.-Nr. 11 924 070...
-
Page 2: Table Of Contents
ESW 7010, ESW 7110..................29 ESW 7570, ESW 7580, ESW 7670, ESW 7680 ..........30 Low temperature cooking ................31 Other uses......................36 Networking with Miele Built-in Appliances ............. 37 Sabbath mode....................38 Cleaning and care ..................... 39 Frequently Asked Questions ................41 Optional accessories .................. - Page 3 MieleCare ......................45 Installation......................46 IMPORTANT SAFETY INSTRUCTIONS - INSTALLATION ........46 Installation notes ....................47 Installation dimensions ESW 7010, ESW 7110 ........... 48 Combination with an H 2840 or CVA/DGC/H 7x4x ........48 Combination with a DGC/H 7x6x ..............49 Side view ......................50 Connections and ventilation................
-
Page 4: Important Safety Instructions
“IMPORTANT SAFETY INSTRUCTIONS”. Miele cannot be held liable for injury or damage caused by non- compliance with these instructions. Keep these operating and installation instructions in a safe place... - Page 5 IMPORTANT SAFETY INSTRUCTIONS Appropriate use This drawer is intended for domestic use and use in other similar environments. The drawer is not intended for outdoor use. The warming drawer is intended for domestic use only as de- scribed in these instructions.
- Page 6 IMPORTANT SAFETY INSTRUCTIONS Safety with children As with any appliance, close supervision is necessary when used by children. Do not leave children unattended: Children should not be alone or unsupervised in the area where the appliance is installed. Do not al- low them to sit or stand on the appliance.
- Page 7 Unauthorized installation, maintenance, and repairs can cause considerable danger for the user. Installation, maintenance, and re- pairs must only be carried out by a Miele authorized technician. A damaged drawer can be dangerous. Always check for visible signs of damage. Never use a damaged appliance.
- Page 8 IMPORTANT SAFETY INSTRUCTIONS Any repairs not performed by a Miele authorized service techni- cian will void the warranty. Defective components should be replaced by Miele original parts only. Only with these parts can safety of the appliance be assured as intended by the manufacturer.
- Page 9 IMPORTANT SAFETY INSTRUCTIONS This device complies with Industry Canada licence-exempt RSS standard(s) and part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including inter- ference that may cause undesired operation.
- Page 10 IMPORTANT SAFETY INSTRUCTIONS Correct use You could burn yourself on the hot drawer or hot dishware. Pro- tect your hands with heat-resistant pot holders or gloves when han- dling hot items. Do not let them get wet or damp. Heat transfers through damp and wet material more quickly with the risk of scalding or burning yourself.
- Page 11 IMPORTANT SAFETY INSTRUCTIONS Keeping Warm mode is to be used for keeping hot dishes warm, not for heating up cold food. Make sure that any food placed in the drawer is at a high enough temperature. In some foods, bacterial growth may occur if the temperature is too low.
- Page 12 IMPORTANT SAFETY INSTRUCTIONS Cleaning and maintenance Danger of electric shock. The steam from a steam cleaner could reach live electrical components and cause a short circuit. Never use a steam cleaner for cleaning. SAVE THESE INSTRUCTIONS AND REVIEW THEM PERIODICALLY...
-
Page 13: Caring For The Environment
Consult with local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for deleting any personal data left on the appliance being disposed. -
Page 14: Overview
Overview ESW 7010, ESW 7110 a Non-slip liner b Controls and indicators c Drawer front with Push2open mechanism The drawer can be opened and closed by lightly pressing the drawer front. -
Page 15: Esw 7570, Esw 7580, Esw 7670, Esw 7680
Overview ESW 7570, ESW 7580, ESW 7670, ESW 7680 a Non-slip liner b Controls and indicators c Drawer front with Push2open mechanism The drawer can be opened and closed by lightly pressing the drawer front. d Wire Rack e Air vents... -
Page 16: Controls And Indicators
Indicates that the Warm Dishes/Plates operating mode is set. k indicator light Indicates that the Warm Cups/Glasses operating mode is set. l indicator light Indicates that the drawer can be controlled via your mobile device. m Optical interface (for Miele Service only) -
Page 17: Included Accessories
Overview Included accessories The accessories supplied with your ap- pliance, as well as a range of optional ones, are available to order from Miele (see “Optional accessories”). Wire Rack For increasing the loading area (ESW 7570, ESW 7580, ESW 7670, ESW 7680). -
Page 18: Before First Use
Before first use Remove any protective foil and stick- Heating up the drawer for the ers. first time Do not remove stickers carrying Heat the empty drawer for at least safety or installation information or 2 hours. the data plate. ... -
Page 19: Miele@Home
- a WiFi network fore, the availability of featured func- tions cannot be guaranteed. - the Miele app - a Miele user account You can create Miele@home availability a user account via the Miele app. The ability to use the Miele app de-... - Page 20 Before first use Connecting via the app If requested to activate the WiFi on the drawer, proceed as follows: The Miele@mobile app can be used to connect to your network. Turn the drawer off. Install the Miele@mobile app on your ...
- Page 21 If the connection fails, you have proba- will no longer be able to access the bly not activated WPS on your router drawer. quickly enough. Repeat the steps above. Tip: If your WiFi router does not support WPS, please connect via the Miele@mobile app.
-
Page 22: Operation
Operation Open the drawer. Using the appliance Touch the sensor control to switch Malfunction can occur due to the drawer on. dirty and/or covered sensor buttons. Touch the sensor control repeat- The sensor buttons do not react or edly until the required operating unintentional switching procedures mode lights up. -
Page 23: Using Mobilestart
The indicator light above the sensor food warm operating mode. control will light up. You can operate Use pot holders when removing the your drawer remotely with the dishware. Miele@mobile app. Operation via the sensor buttons has Duration precedence over operation via the app. -
Page 24: Temperature Settings
Operation Temperature settings Each operating mode has its own temperature range. The factory default recom- mended temperatures are printed in bold. The temperature can be altered in 10°F (5°C) increments by touching the sensor control. The last temperature selected is automatically activated the next time the drawer is switched on, and this is shown in the control field (exception: Low temperature cooking). -
Page 25: Keeping Food Warm
Keeping food warm Tips To maintain your food’s optimum quality please note the following: - Place the hot food in pre-heated dishware. Place the dishware in the drawer while it is being pre-heated. - Do not cover roast or fried food which you want to keep crisp. - Page 26 Keeping food warm Health risk caused by using too low a temperature. Bacteria may develop in the food if the temperature used for keeping food warm is too low. Only use the Keeping food warm operating mode. This operating mode is for keeping food warm which has just been cooked and is still hot.
- Page 27 Keeping food warm Settings Food Dishware Cover Temperature for Position the setting dishware Bot- Wire Rack* Steak rare Plates Bakes/gratin Gratin dish Roasting Plates Stew ...
-
Page 28: Warming Dishes
An addi- - how the load is arranged tional wire rack is available to order via - temperature setting the Miele online shop, Miele Customer Service, or from your Miele dealer (see “Optional accessories”). -
Page 29: Esw 7010, Esw 7110
Warming dishes ESW 7010, ESW 7110 The following loading examples are intended to serve as a guide: 6 place settings 10 1/4" (26 cm) 6 dinner plates 9 1/16" (23 cm) 6 deep soup plates 7 1/2" (19 cm) 6 dessert plates 1 oval platter 12 5/8" (32 cm) 6 5/16"... -
Page 30: Esw 7570, Esw 7580, Esw 7670, Esw 7680
Warming dishes ESW 7570, ESW 7580, ESW 7670, ESW 7680 The following loading examples are intended to serve as a guide: 12 place settings 12 dinner plates 10 1/4" (26 cm) 9 1/16" (23 cm) 12 deep soup plates 7 1/2" (19 cm) 12 dessert plates 1 oval platter 12 5/8"... -
Page 31: Low Temperature Cooking
Pre-heat the drawer with the suitable cooking containers for 15 minutes. This If food probes from other Miele Built- ensures that the dishware and the inte- in Appliances are used in the drawer, rior of the drawer reach the required they may affect the built-in appli- temperature. - Page 32 Low temperature cooking Using the Low temperature Tips cooking operating mode - Do not cook the food all the way through. Sear the food again after Select the Low temperature cook- cooking. ing operating mode. - The food can be sliced straight away. ...
- Page 33 Low temperature cooking Pre-heat the cooking container for 15 minutes. In this time, rest the food at room temperature. Place the food into the pre-heated cooking container in the compartment. The cooking durations given in the charts are guidelines only. The food can be cooked further if required.
- Page 34 Low temperature cooking Pork cooking chart [min] * °F [°C] [min] Type of meat Tenderloin 6–8 total 145 (60) 90–110 approx. 19 1/2 lb (550 g) Medallions 2 per side 145 (60) 85–100 approx. 1 1/2"...
- Page 35 Low temperature cooking Fish cooking chart [min] °F [°C] [min] Type of fish Salmon 2 on the 126 (52) 45–60 0.8 lb (400 g) skin side Trout (whole) 2 per side 126 (52) 15–30 approx. 3/4 lb (350 g)
-
Page 36: Other Uses
Other uses Food Cookware Cover dishes [h:min] Defrosting Bowl/plate 0:50 berries Dissolving Bowl 0:15 gelatin Proofing Bowl Yes, with 0:30 plate Preparing Yogurt jars –... -
Page 37: Networking With Miele Built-In Appliances
Networking is carried out via the Miele@mobile app as normal. See “Before using for the first time – Setting up Miele@home” as well as the Miele@mobile app for detailed informa- tion about this function. Operation via the sensor buttons has precedence over operation via the app. -
Page 38: Sabbath Mode
Sabbath mode Activating Sabbath mode To comply with religious requirements, the drawer can be programmed for the Duration of 24 hours duration of the Sabbath. This mode will be switched off automatically after If necessary, switch the drawer off. about 24 or 72 hours, depending on ... -
Page 39: Cleaning And Care
Cleaning and care Risk of damage due to moisture Danger of burning from hot inte- ingress. rior. The steam from a steam cleaner The interior of the drawer will be hot could reach live electrical compo- after use. nents and cause a short circuit. - Page 40 Cleaning and care Cleaning the drawer front and Cleaning the non-slip liner interior Damage due to incorrect clean- ing. Malfunction can occur due to Washing the non-slip liner in a dish- dirty and/or covered sensor buttons. washer or washing machine will The sensor buttons do not react or damage it.
-
Page 41: Frequently Asked Questions
Reset the breaker (see data plate for the correct fuse rating). If, after turning the breaker or GFCI back on, the drawer will still not turn on, contact a qualified electrician or Miele Customer Service. Noise occurs during op- The noise is caused by the fan, which distributes eration the heat evenly throughout the drawer. - Page 42 Frequently Asked Questions Problem Possible cause and solution The dishware is too hot. The Warm Dishes/Plates or Warm Cups/ Glasses operating mode was not selected. Set the correct operating mode. The temperature setting is too high. Select a lower temperature. Abrasion marks on the Installing or removing an appliance above the drawer top edge of the front...
-
Page 43: Optional Accessories
Optional accessories Miele offers a range of useful acces- Wire Rack sories, as well as cleaning and condi- tioning products for your appliance. These products can be easily ordered from the Miele webshop. These products can also be ordered For increasing the loading area (ESW... -
Page 44: Customer Service
Miele dealer or Miele Customer Service. You can book a Miele Service Call online at www.miele.com/service. Contact information for Miele Customer Service can be found at the end of this document. Please quote the model identifier and serial number of your appliance (SN) when contacting Miele Customer Service. -
Page 45: Mielecare
Miele appliance. Please note that unless expressly ap- proved in writing by Miele’s Service de- partment, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. -
Page 46: Installation
Miele as being suitable. Miele cannot guarantee trouble-free operation if the appliance is operated in combination with appliances other than those quoted by Miele as being suitable. The base on which the drawer and the combination appliance are fitted must be fixed in place and must support the weight of both ap- pliances. -
Page 47: Installation Notes
*INSTALLATION* Installation Installation notes The drawer is available in 3 models, which differ in height. The building-in dimen- sions for the drawer must be added to the building-in dimensions for the combina- tion appliance to establish the niche size required. Combination options ESW 7010 ESW 7110 ESW 7570... -
Page 48: Installation Dimensions Esw 7010, Esw 7110
Installation Installation dimensions ESW 7010, ESW 7110 Combination with an H 2840 or CVA/DGC/H 7x4x Miele Drawers can be installed flush or proud. Discuss your requirements with your architect, kitchen designer, and installer. More installation drawings are available on the Miele website. -
Page 49: Combination With A Dgc/H 7X6X
*INSTALLATION* Installation Combination with a DGC/H 7x6x Miele Drawers can be installed flush or proud. Discuss your requirements with your architect, kitchen designer, and installer. More installation drawings are available on the Miele website. The housing unit must not have a back panel installed behind the built-in niche. -
Page 50: Side View
*INSTALLATION* Installation Side view... -
Page 51: Connections And Ventilation
*INSTALLATION* Installation Connections and ventilation A Cutout (min. 2 51/64 in² / 1,800 mm²) for power cord, water hoses, and ventila- tion ! No electrical connection in this area. The socket for the electrical connection must be accessible, e.g., in an adjacent kitchen cabinet. E Electrical connection... -
Page 52: Installation Dimensions Esw 7570, Esw 7670
Installation Installation dimensions ESW 7570, ESW 7670 Combination with a CVA/DGC/H 7x7x Miele Drawers can be installed flush or proud. Discuss your requirements with your architect, kitchen designer, and installer. More installation drawings are available on the Miele website. The housing unit must not have a back panel installed behind the built-in niche. -
Page 53: Combination With A Dgc/H 7X8X
*INSTALLATION* Installation Combination with a DGC/H 7x8x Miele Drawers can be installed flush or proud. Discuss your requirements with your architect, kitchen designer, and installer. More installation drawings are available on the Miele website. The housing unit must not have a back panel installed behind the built-in niche. -
Page 54: Side View
*INSTALLATION* Installation Side view... -
Page 55: Connections And Ventilation
*INSTALLATION* Installation Connections and ventilation A Cutout (min. 2 51/64 in² / 1,800 mm²) for power cord, water hoses, and ventila- tion ! No electrical connection in this area. The socket for the electrical connection must be accessible, e.g., in an adjacent kitchen cabinet. E Electrical connection... -
Page 56: Installation Dimensions Esw 7580, Esw 7680
Installation dimensions ESW 7580, ESW 7680 Installation in a tall or base cabinet Miele Drawers can be installed flush or proud. Discuss your requirements with your architect, kitchen designer, and installer. More installation drawings are available on the Miele website. -
Page 57: Side View
*INSTALLATION* Installation Side view... -
Page 58: Connections And Ventilation
*INSTALLATION* Installation Connections and ventilation A Cutout (min. 2 51/64 in² / 1,800 mm²) for power cord, water hoses, and ventila- tion ! No electrical connection in this area. The socket for the electrical connection must be accessible, e.g., in an adjacent kitchen cabinet. E Electrical connection... -
Page 59: Installation
*INSTALLATION* Installation Installation Check that the base on which the drawer will sit is clean and level (use a level). This is important for the ap- pliance to function correctly. Push the drawer into the housing unit until the drawer front is flush with the housing unit and make sure that it is correctly aligned in the unit. -
Page 60: Electrical Connection
Instal- drawer. lation, repair, and maintenance work should only be performed by a Miele-authorized service technician. The voltage and frequency listed on the rating label must correspond with the household electrical supply to prevent appliance damage. - Page 63 Customer Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Headquarters and Miele Centre Princeton, NJ 08540 161 Four Valley Drive Vaughan, ON L4K 4V8 Customer Service & Support www.miele.ca Phone: 888-99-MIELE(64353) Customer Care Centre info@mieleusa.com...
- Page 64 ESW 7010, ESW 7110, ESW 7570, ESW 7580, ESW 7670, ESW 7680 en-US M.-Nr. 11 924 070 / 00...