EC Declaration of Conformity double-insulated and can, therefore, also be used from Makita Corporation responsible sockets without earth wire. manufacturer declare that the following Makita ENG905-1 Noise machine(s): The typical A-weighted noise level determined according Designation of Machine: to EN60745: Demolition Hammer Model No./ Type: HM1214C...
The technical documentation is kept by our authorised adapter plugs with earthed (grounded) power representative in Europe who is: tools. Unmodified plugs and matching outlets will Makita International Europe Ltd. reduce risk of electric shock. Michigan Drive, Tongwell, Avoid body contact with earthed or grounded...
Page 4
GEB004-6 16. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves HAMMER SAFETY WARNINGS away from moving parts. Loose clothes, Wear ear protectors. Exposure to noise can jewellery or long hair can be caught in moving cause hearing loss.
WARNING: Number on adjusting dial Blows per minute DO NOT let comfort or familiarity with product 1,900 (gained from repeated use) replace strict adherence 1,700 to safety rules for the subject product. 1,450 MISUSE or failure to follow the safety rules stated in 1,200 this instruction manual may cause serious personal 009956...
After installing, always make sure that the bit is securely Side handle (auxiliary handle) held in place by trying to pull it out. To remove the bit, pull the releasing cover down all the 1. Side handle way and pull the bit out. 2.
• like. Discoloration, deformation or cracks may result. Lubrication 010073 Then replenish with fresh grease (60g). Use only Makita CAUTION: genuine hammer grease (optional accessory). Filling This servicing should be performed by Makita • with more than the specified amount of grease (approx.
Page 8
Makita Corporation Anjo, Aichi, Japan www.makita.com 884901B224...