Selecting Digital Audio Output - Sony DVP-FX700 Service Manual
Hide thumbs
Also See for DVP-FX700:
- Operating instructions manual (69 pages) ,
- Operating instructions (2 pages) ,
- Service manual (89 pages)
Table of Contents
Advertisement
Selecting Digital Audio Output
Each DVD disc has a variety of audio output options.
Set the player's Digital Audio Output according to the
type of audio system you use.
1. At the SETUP menu screen, press V/v to select
"Digital Audio Output" and press b.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Area Code
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
2. Press V/v to select the desired output and
press ENTER.
You can select Digital Audio Output or Sampling
Frequency item by pressing ENTER.
■
Digital Audio Output
DOLBY DIGITAL/PCM: Select "DOLBY
DIGITAL/PCM" if an active digital output is supplied
to a Dolby Digital decoder, (or an amplifier or other
equipment with Dolby Digital decoder).
Selecting Digital Audio Output (continued)
■
Sampling Frequency
To change the Sample Frequency setting, first select
the desired digital audio output type as indicated on
page 51.
If your A/V receiver or surround processor is NOT
capable of handling 96kHz signals, select the 48kHz
option. When this choice is made, this unit will auto-
matically convert any 96kHz signals to a 48kHz out-
put so that your system is capable of decoding them.
If your A/V receiver or surround processor is capable
of handling 96kHz signals, select the 96kHz option.
When this choice is made, this unit will pass each
type of signal through without any further processing.
DOLBY
/PCM
DIGITAL
Stream/PCM
PCM
Sample Freq.
48 KHz
96KHz
51
52
1-24
Stream/PCM: Select "Stream/PCM" if an active
digital output is supplied to an amplifier or other
equipment with DTS decoder, Dolby Digital decoder
and MPEG decoder.
PCM: Select "PCM" if an active digital output is
supplied to an amplifier or other equipment with lin-
ear PCM only (or MD recorder or DAT deck).
Playback
Stream/PCM
Disc
96 kHz
PCM
Linear PCM
DVD
DTS DVD
DTS bit Stream
Dolby Digital
Dolby Digital
DVD
bit Stream
MPEG DVD
MPEG bit Stream
Audio CD/
PCM
Video CD
DTS Audio CD
DTS bit Stream
NOTES:
• When you are not using the player's digital audio
output, don't select any of the options.
• If an active digital audio output signal is supplied
to a receiver or other equipment without a corre-
sponding digital decoding capability, a very loud
noise may be produced which could permanently
damage the speakers.
• The DTS DVD disc sound is played back only
when the DVD player is connected to a receiver
with a DTS decoder.
DVD
OUTPUT
Dolby Digital/
PCM only
PCM
PCM
PCM
DTS bit Stream
DTS bit Stream
Dolby Digital
PCM
bit Stream
PCM
PCM
PCM
PCM
DTS bit Stream
DTS bit Stream
DVD
Advertisement
Table of Contents
Troubleshooting
