Miele AWG 102 Operating And Installation Instructions page 10

Hide thumbs Also See for AWG 102:

Table of Contents

Installation

^ Feed the flexible ducting through the

telescopic wall pipe and secure it to

the stub on the motor unit fixing

bracket with a hose clip.

^ Secure the bracket to the outside wall

with 3 screws.

^ Extend the flexible ducting from the

inside of the wall along the wall pipe

and seal the gap between the

ducting and the wall pipe with

jointing compound.

^ Fit the motor unit over the bracket

and secure it in position.

^ Connect the control cable plug

connectors.

^ Use the extension cable supplied to

lengthen the cabling if necessary.

^ If it is still not long enough, please

refer to the notes in "Electrical

connection".

Table of Contents

Show Quick Links

Table of Contents

Ablg 202 Ddf 125 Ddf 150 Ddg 102 Mg 100