Related Manuals for Sony PT-1155-IR10
Summary of Contents for Sony PT-1155-IR10
- Page 1 Installation Guide PT-1155-IR10 Content of box: 1 x Touch overlay 3 x Brackets 13 x Phillips screws...
-
Page 2: Table Of Contents
Troubleshooting 9 -11 Specifications Terminology Monitor: refers to the Sony FWL-55W805C / FW-55X8570C LCD screen. Sometimes referred to as “display screen. ” Touch overlay: refers to the PresTop overlay that fits onto the monitor and provides the touch functionality. Touch screen: refers to the combined unit—the monitor and the touch overlay. -
Page 3: Introduction
Introduction Congratulations on your purchase of a PresTop PT Touch Overlay. This product turns a Sony FWL-55W805C / FW-55X8570C large-format display, into an interactive display. You can control a computer application simply by touching the screen. The PT Touch Overlay can be connected to the computer via USB cable, thus providing maximum versatility. -
Page 4: Capabilities
Capabilities The following table shows the touch functionality provided by a PresTop PT touch over- lay with different operating systems. 1) Windows must be non OEM version. 2) Kernal 3.0+, csn support multitouch by adding patch. Kernal 3.5+, HID compliance support multitouch. 3) Gesture support on request. -
Page 5: Unpacking The Unit
Unpacking the Unit Unpack the unit, taking care not to damage the surfaces. Check the product for any signs of damage in transit. Installation Requirements Once you have unpacked the unit, make sure you have the following: • The display monitor that you are going to mount the touch overlay onto. •... -
Page 6: Installation Instructions
Installation Instructions Depending on the size the installation normally requires two people. Preparation After unpacking and checking for any damage, place the touch overlay face down on a clean, soft surface, such as a clean carpet. Make sure the back surface of the glass is clean. (See for instructions page 9). - Page 7 Place the monitor gently in the touch overlay with 2 persons. Attach the brackets that hold the monitor in place to the touch overlay with the Philips screws. Connecting Cables and Switching On Connect the cables and switch on power in the following order: Connect the video cable from the computer to the monitor.
-
Page 8: Usb Installation
USB Installation USB installations require no special software; the touch overlay communicates directly with the computer’s operating system via the USB interface, just like a USB mouse. Connect the USB cable from the touch overlay to the computer. Once the cable is connected, the computer automatically detects the USB device (the touch overlay). -
Page 9: Operating The Touch Screen
Operating the Touch Screen Mouse actions PresTop PT Touch Overlay provides full mouse functionality—click, drag, double-click and right-click. • Single click is performed by tapping you finger once on the screen. • Double click is performed by tapping your finger twice on the screen in quick succession. -
Page 10: Cleaning The Touch Screen
Cleaning the Touch Screen To clean the touch screen, use a lint-free, soft cloth dampened with standard, household glass cleaning solution as follows: Spray a small amount of glass cleaner onto the cloth. Wipe the glass of the touch screen to remove any dirt, dust, or finger marks. Wipe the clear surfaces around the edges of the screen. - Page 11 Unable to calibrate the touch overlay If you have a problem with calibrating the touch overlay, contact your PresTop support provider for assistance. The cursor moves erratically Make sure there is nothing blocking the optics of the touch screen. Clean the glass and edges of the screen. For instructions, see Cleaning the Touch Screen on page 7.
- Page 12 Right click on [USB Composite Device] and choose [Properties]. On the Properties screen, verify that the location refers to the touch screen. Close the Properties screen. With USB Composite Device selected in the Device Manager list, press [Delete] on your keyboard. The computer displays the following dialog.
-
Page 13: Specifications
Specifications: Weight screen: 20 kg 55” IR overlay: 22kg Thickness glass: 6 mm Outside sizes touch frame: 1295 x 768 mm Thickness screen incl. IR touch frame: 78 mm Thickness screen incl. IR touch frame and back cover: 110 mm Copyright PresTop B.V. - Page 14 Address: De Dintel 29-35 5684 PS Best The Netherlands Tel: +31(0)499 367 606 Fax: +31(0)499 367 003 sales@prestop.nl www.prestopproducts.com Copyright PresTop B.V. 2015. All rights reserved...