WARNING
Be careful not to drop any components. Dropping components may damage them or cause an
injury.
CAUTION
•
Do not block the openings of the shelf. Allow space of at least 10 cm at the sides of the shelf, and 20
cm above the top-mounted shelf.
•
Make sure that the surface behind the shelf is flat and free of obstacles, so that the openings on the
back of the shelf will not be blocked.
•
Make sure that the surface behind the shelf is not made of wood.
Note
•
Make sure to remove the front cover from each shelf before installing the shelves (refer
to "3.2.3 Opening/Closing the Front Cover").
•
Do not install any optional service cards or a PSU in the shelves before installation.
Installing the Basic Shelf
To install the Basic Shelf, attach the metal bracket (supplied with the Basic Shelf) to the base stands (supplied
with the Mounting Kit) first. Then, install the base stands on the floor and fix the Basic Shelf to them.
1.
Attach the support brackets to the base stands.
3.2.6 Installation of 3- or 4-shelf System (Tower Type)
Support Bracket
Base Stand
Installation Manual
69