Panasonic KX-TDE600 Installation Manual page 245
Pure ip-pbx
Hide thumbs
Also See for KX-TDE600:
- Installation manual (228 pages) ,
- Programming manual (60 pages) ,
- Pc programming manual (982 pages)
Table of Contents
Advertisement
PROBLEM
•
During a power failure,
extensions connected
to ports 1 to 4 of
EMSLC16/ESLC16/
ECSLC24/CSLC16 and
ports 1 to 2 of DHLC8/
SLC8 cards do not
operate.
•
Originating an outside
call, call transfer, or
conference cannot be
performed.
•
The KX-HGT100 does
not work properly, or
some features cannot
be performed using the
KX-HGT100.
PROBABLE CAUSE
•
A DPT or APT is
connected to the
extension port.
•
The dialling mode (tone
or pulse) is incorrect.
•
The corresponding
flexible button does not
exist on the PT.
•
The firmware of the
KX-HGT100 and the
MPR software file
version of the PBX are
not upgraded to their
latest versions.
SOLUTION
•
Disconnect the DPT or APT and connect
an SLT.
•
Set the Tone/Pulse switch to the other
position.
•
Programme the flexible button. Refer to
"1.20.2 Flexible Buttons" in the Feature
Guide.
•
Upgrade the firmware of the KX-HGT100
and the MPR software file version of the
PBX to their latest versions.
5.1.3 Operation
Installation Manual
245
Advertisement
Table of Contents
Troubleshooting
