Placement Of Burner Heads And Caps; Placement Of Burner Grates - Electrolux E36DF76GPS Use & Care Manual
30” & 36” dual fuel ranges
Hide thumbs
Also See for E36DF76GPS:
- Installation manuallines (4 pages) ,
- Specifications (2 pages) ,
- Design manual (164 pages)
Table of Contents
Advertisement
PlaceMent of buRneR Heads and caPs
For the 18 000 BTU burner:
Place the burner head over the gas orifice
(Figure 1). Be careful not to damage the
electrode while placing the burner head
over the orifice. Make sure electrode fits
correctly into slot in burner head.
For all burners:
Place a burner cap on each burner head
(see Figure 2), matching the cap size to
the head size. The cap for each burner has
an inner locating ring which centers the
cap correctly on the burner head. Be sure
that all the burner caps and burner heads
are correctly placed BEFORE using your
appliance.
Make sure each burner cap is properly
aligned and level.
Turn the burner on to determine if it will light.
If the burner does not light, contact a Service
Center. Do not service the sealed burner
yourself.
PlaceMent of buRneR GRates
Place grates on the Ceramic Glass Cooktop. Be sure they are right
located inside the stainless steel frame.
ATTENTION: Do not slide the grates on the stainless steel frame, doing so
can damage the surface.
Surface Cooking
Burner
Cap
Burner
Head
Gas
Opening
Electrode
Figure 1
13
Burner
Cap
Burner
Head
Figure 2
Hide quick links:
Advertisement
Table of Contents
