Sony HCD-GNZ77D Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Stereo System
  5. HCD-GNZ77D
  6. Service manual

Sony HCD-GNZ77D Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

HCD-GNZ77D/GNZ88D
QQ
3 7 63 1515 0
SERVICE MANUAL
Ver. 1.3 2007. 08
• HCD-GNZ77D/GNZ88D are the
tuner, deck, DVD and amplifier
section in MHC-GNZ77D/GNZ88D.
TE
L 13942296513
Amplifier section
HCD-GNZ88D
The following measured at AC 120, 127, 220, 240 V,
50/60 Hz
DIN power output (rated)
75 W + 75 W
(4 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
Front speaker:
100 W + 100 W
(4 ohms at 1 kHz, 10%
THD)
Center speaker:
40 W (8 ohms at 1 kHz,
10% THD)
Surround speaker:
40 W + 40 W
(8 ohms at 1 kHz, 10%
THD)
HCD-GNZ77D
The following measured at AC 120, 127, 220, 240 V,
50/60 Hz
DIN power output (rated)
75 W + 75 W
(4 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
100 W + 100 W
(4 ohms at 1 kHz, 10%
THD)
Inputs
VIDEO INPUT (phono jacks):
VIDEO: 1 Vp-p, 75 ohms
AUDIO L/R: Voltage 250 mV,
impedance 47 kilohms
TV/SAT AUDIO IN L/R (phono jack):
www
Voltage 250 mV/450 mV,
impedance 47 kilohms
.
Sony Corporation
9-887-258-04
2007H04-1
Personal Audio Division
© 2007. 08
Published by Sony Techno Create Corporation
http://www.xiaoyu163.com
DVD
Section
Tape Deck
Section
x
ao
u163
y
i
http://www.xiaoyu163.com
2 9
8
(Photo: HCD-GNZ77D)
Model Name Using Similar Mechanism
DVD Mechanism Type
Optical Pick-up Name
Model Name Using Similar Machanism
Q Q
3
6 7
1 3
1 5

SPECIFICATIONS

Outputs
VIDEO OUT (phono jack):
COMPONENT VIDEO OUT:
S-VIDEO OUT (4-pin/mini-DIN jack):
PHONES (stereo mini jack):
FRONT SPEAKER:
SURROUND SPEAKER (HCD-GNZ88D):
CENTER SPEAKER (HCD-GNZ88D):
SUB WOOFER OUT (phono jack):
co
.
9 4
2 8
E Model
HCD-GNZ7D/GNZ8D/GNZ9D
CDM74HF-DVBU101//C
KHM-310CAB/C2NP
NEW
0 5
8
2 9
9 4
2 8
max. output level
1 Vp-p, unbalanced, Sync
negative load impedance
75 ohms
Y: 1 Vp-p, 75 ohms
P
/C
: 0.7 Vp-p, 75 ohms
B
B
P
/C
: 0.7 Vp-p, 75 ohms
R
R
Y: 1 Vp-p, unbalanced,
Sync. negative
C: 0.286 Vp-p, load
impedance 75 ohms
Accepts headphones of
8 ohms or more
Use only the supplied speakers
Use only the supplied speakers
Use only the supplied speakers
Voltage 250 mV,
impedance 1 kilohm
– Continued on next page –
m
DVD DECK RECEIVER
9 9
9 9
1

Advertisement

Table of Contents
loading

Related Manuals for Sony HCD-GNZ77D

Summary of Contents for Sony HCD-GNZ77D

  • Page 1 AUDIO L/R: Voltage 250 mV, impedance 47 kilohms TV/SAT AUDIO IN L/R (phono jack): DVD DECK RECEIVER Voltage 250 mV/450 mV, impedance 47 kilohms u163 Sony Corporation 9-887-258-04 2007H04-1 Personal Audio Division © 2007. 08 Published by Sony Techno Create Corporation http://www.xiaoyu163.com...

  • Page 2: Test Mode

    HCD-GNZ77D/GNZ88D SECTION 3 TEST MODE 3 7 63 1515 0 [PANEL TEST MODE] • Check of Amplifier 1. Press [EQ BAND/MEMORY] button repeatedly until a message • This mode is used to check the fluorescent indicator tube, LEDs, keys, VOLUME jog, model, destination, software version and “GEQ MAX”...
  • Page 3 HCD-GNZ77D/GNZ88D 3 7 63 1515 0 Procedure: [TV/SAT SWITCHING] 1. Press button to turn on the system. • This mode let you switch from TV to SAT and vice-versa. 2. Press [TUNER/BAND] button repeatedly to select the “AM”. 3. Press button to turn off the system.
  • Page 4 HCD-GNZ77D/GNZ88D Ver. 1.3 3 7 63 1515 0 • TEST DISC LIST Manual Adjust Be sure to use the DVD disc that matches the signal standards of your region. 1. Track Balance Adjust: • CD 2. Track Gain Adjust: YEDS-18 (Part No.: 3-702-101-01)
  • Page 5 HCD-GNZ77D/GNZ88D Ver. 1.3 3 7 63 1515 0 • Time of error code Emg.History Check This is the laser time when an error occurred. Laser Hours 999h 59min Example of Error code 999h 59min 1. 01 05 04 04 00 92 46 00 1.

  • Page 6: Mechanical Adjustments

    HCD-GNZ77D/GNZ88D Ver. 1.3 SECTION 4 MECHANICAL ADJUSTMENTS 3 7 63 1515 0 To return to the Top Menu of Remocon Diagnosis Menu Precaution Press [0] button on the remote commander. 1. Clean the following parts with a denatured alcohol-moistened swab: •...

  • Page 7: Electrical Adjustments

    HCD-GNZ77D/GNZ88D Ver. 1.3 SECTION 5 ELECTRICAL ADJUSTMENTS 3 7 63 1515 0 Checking Location: DMB15 board (Side A) DVD SECTION When the optical pick-up assy is replaced, perform the “Execute DMB15 BOARD (SIDE A) IOP Measurement”. Execute IOP Measurement (See page 21)
  • Page 8 HCD-GNZ77D/GNZ88D 3 7 63 1515 0 3. Mode: Playback DECK SECTION 0 dB=0.775 V test tape 1. Demagnetize the record/playback head with a head P-4-A063 demagnetizer. oscilloscope (6.3 kHz, –10 dB) 2. Do not use a magnetized screwdriver for the adjustments.
  • Page 9 HCD-GNZ77D/GNZ88D SECTION 6 DIAGRAMS 3 7 6 3 1 5 1 5 0 6-1. BLOCK DIAGRAM — RF/SERVO SECTION — DVDRFIP DVDA DVDB DETECTOR DVDC DVDD 8 NA 9 NB CD/DVD RF AMP, FOCUS/TRACKING ERROR AMP DVD SYSTEM PROCESSOR...
  • Page 10 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-2. BLOCK DIAGRAM — VIDEO SECTION — YUV3 YUV2 YUV1 YUV4 MAIN YUV5 CR/B SECTION YUV6 CB/R (Page 29) WIDE WIDE D/A CONVERTER DSEL DSEL GNZ77D IC301 IC3731 LOUT2+...
  • Page 11 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-3. BLOCK DIAGRAM — MAIN SECTION — CENTER SUBWOOFER VIDEO GNZ77D J503 SURROUND L SOFT MUTE MUTE SECTION SUB WOOFER JW261 CONTROL (Page 28) Q263,264 FRONT L Q305,306,311 REC/PB AMP,...
  • Page 12 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-4. BLOCK DIAGRAM — AUDIO SECTION — AMP (FRONT LCH) D/A CONVERTER IC530 IC500 TM1500 (1/3) 6 PWM A OUTL1 OUT A A/D CONVERTER 14 PWM B OUTL2 DBFB FEED BACK...
  • Page 13 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-5. BLOCK DIAGRAM — FUNCTION/POWER SECTION — T1300 DC/DC GNZ88D GNZ88D:EXCEPT TH CONVERTER D1300 TRANSFORMER SW1100 SYSTEM CONTROL VOLTAGE IC401 (4/4) Q1300 D1302 SELECTER S1309–1316 FUNCTION 120V AD KEY1...
  • Page 14 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-6. CIRCUIT BOARDS LOCATION • Note For Printed Wiring Boards And Schematic Diagrams Note on Printed Wiring Board: Note on Schematic Diagram: • X : parts extracted from the component side.
  • Page 15 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 • Waveforms — DMB15 BOARD — IC102 <z.v (YUV1) IC102 6 (DVDRFIP) IC102 <xx. (XTALI) 700 mVp-p 1.8 Vp-p 1.3 Vp-p 27MHz 500 mV/DIV, 20 µ sec/DIV 500 mV/DIV, 20 µ sec/DIV...
  • Page 16 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-7. PRINTED WIRING BOARDS — DRIVER SECTION — • Refer to page 32 for Circuit Boards Location. : Uses unleaded solder. 1 3 9 4 2 2 9 6 5 1 3...
  • Page 17 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-8. SCHEMATIC DIAGRAM — DRIVER SECTION — • Refer to page 69 for IC Block Diagrams. IC B/D IC701 R702 R701 D701 C715 CN704 C751 CN721 M751 IC B/D...
  • Page 18 HCD-GNZ77D/GNZ88D Ver. 1.1 3 7 6 3 1 5 1 5 0 New part of EEPROM (IC103) on the DMB15 board cannot be used. Therefore, if the mounted DMB15 board (A-1167-719-A, etc.) is replaced, exchange new EEPROM (IC103) with that used before the replacement.
  • Page 19 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 R231 R220 R225 R1502 EXCEPT E2 R5016 C109 R223 R226 R5014 C212 C214 R5009 GNZ88D R1150 R106 R206 R105 R207 R204 R205 GNZ77D R5012 R213 R5011 GNZ77D C213 R2504...
  • Page 20 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-10. SCHEMATIC DIAGRAM — DMB15 SECTION (1/5) — CN301 JL4701 R321 JL4702 R4701 JL4703 (Page 40) JL4704 R4702 JL4705 JL4706 R4703 JL4707 JL4708 R4704 (Page 64) JL4709 (Page 40)
  • Page 21 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-11. SCHEMATIC DIAGRAM — DMB15 SECTION (2/5) — • Refer to page 69 for IC Block Diagrams. R3781 R3783 R3787 C3781 R3784 C3782 R3788 R3782 R3785 C3783 R3786 C3784...
  • Page 22 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 • Refer to page 33 for Waveforms. 6-12. SCHEMATIC DIAGRAM — DMB15 SECTION (3/5) — • Refer to page 70 for IC Pin Description of IC102. (Page 42) (Page 41)
  • Page 23 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-13. SCHEMATIC DIAGRAM — DMB15 SECTION (4/5) — (Page 38) (Page 38) R223 R225 R231 R234 R232 R221 C233 C209 C211 R230 (Page 40) R220 C212 C215 (Page 38)
  • Page 24 HCD-GNZ77D/GNZ88D Ver. 1.1 3 7 6 3 1 5 1 5 0 New part of EEPROM (IC103) on the DMB15 board cannot be used. Therefore, if the mounted DMB15 board (A-1167-719-A, etc.) is replaced, exchange new EEPROM (IC103) with that used before the replacement.
  • Page 25 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-15. PRINTED WIRING BOARD — MAIN SECTION — • Refer to page 32 for Circuit Boards Location. : Uses unleaded solder. • Semiconductor Location Ref. No. Location Ref. No.
  • Page 26 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 • Refer to page 33 for Waveforms. 6-16. SCHEMATIC DIAGRAM — MAIN SECTION (1/4) — • Refer to page 75 for IC Pin Description of IC401. (Page 35) (Page 42)
  • Page 27 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-17. SCHEMATIC DIAGRAM — MAIN SECTION (2/4) — • Refer to page 78 for IC Pin Description of IC403. (Page 60) R532 CN205 JW390 R582 C539 CN406 R531 R581...
  • Page 28 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-18. SCHEMATIC DIAGRAM — MAIN SECTION (3/4) — (Page 45) (Page 44) C197 R200 C160 R188 C198 Q153 R163 R167 R166 HP901 CN121 FB103 C106 R198 TP321 C163 TP322...
  • Page 29 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-19. SCHEMATIC DIAGRAM — MAIN SECTION (4/4) — (Page 45) (Page 44) Q585 FAN901 R583 R579 R580 C581 CN580 Q131 C236 C286 C237 C287 C238 C288 C239 C289 D135...
  • Page 30 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-20. PRINTED WIRING BOARD — S-MASTER SECTION — • Refer to page 32 for Circuit Boards Location. : Uses unleaded solder. • Semiconductor Location Ref. No. Location D532 D534...
  • Page 31 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 (Page 65) (Page 65) (Page 65) SPEAKER BOARD CN1500 SPEAKER BOARD CN1601 SPEAKER BOARD CN1700 (CHASSIS) (CHASSIS) POWER BOARD CN1101 (GNZ88D) (Page 67) POWER UNIT (GNZ77D) 1 3 9 4 2 2 9 6 5 1 3...
  • Page 32 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-21. SCHEMATIC DIAGRAM — S-MASTER SECTION (1/4) — C813 C713 R712 C812 IC812 R700 R819 C818 R816 C815 R815 C817 CN812 FB863 R701 C814 R814 R818 R863 C863 R812...
  • Page 33 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-22. SCHEMATIC DIAGRAM — S-MASTER SECTION (2/4) — R841 Q840 R840 C840 Q871 IC730 R730 Q870 C830 C731 C747 C870 R731 C745 C744 C749 R732 L780 R733 R871 C743...
  • Page 34 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-23. SCHEMATIC DIAGRAM — S-MASTER SECTION (3/4) — • Refer to page 33 for Waveforms. (Page 50) IC810 R811 C806 C810 C805 C811 R515 R512 R500 TP500 R501 1 3 9 4 2 2 9 6 5 1 3...
  • Page 35 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-24. SCHEMATIC DIAGRAM — S-MASTER SECTION (4/4) — (Page 51) IC530 R530 C547 C531 R531 C545 C544 R532 L580 R533 C543 C582 D534 R535 C542 C580 C581 C583 Q851...
  • Page 36 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-25. PRINTED WIRING BOARD — ADC SECTION — • Refer to page 32 for Circuit Boards Location. : Uses unleaded solder. • Semiconductor Location Ref. No. Location E C B...
  • Page 37 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-26. SCHEMATIC DIAGRAM — ADC SECTION — • Refer to page 33 for Waveforms. JR21 JR19 IC13 (Page 47) JR16 JR15 1 3 9 4 2 2 9 6 5 1 3...
  • Page 38 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-27. PRINTED WIRING BOARDS — PANEL SECTION — • Refer to page 32 for Circuit Boards Location. : Uses unleaded solder. OPEN/CLOSE DISC 1 DISC 2 DISC 3 MAIN...
  • Page 39 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-28. PRINTED WIRING BOARD — VOLUME SECTION — • Refer to page 32 for Circuit Boards Location. : Uses unleaded solder. (Page 56) • Semiconductor Location Ref. No. Location...
  • Page 40 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-29. SCHEMATIC DIAGRAM — PANEL SECTION — FL1300 IC1301 CN1403 CN1453 C1308 R1306 C1309 R1314 C1307 C1357 D1306 CN1402 C1305 JR1305 D1300 D1305 L1300 TP1300 C1306 C1311 R1300 D1302...
  • Page 41 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-30. PRINTED WIRING BOARD — MIC SECTION — • Refer to page 32 for Circuit Boards Location. : Uses unleaded solder. (Page 49) (Page 43) S-MASTER BOARD CN503 MAIN BOARD CN205...
  • Page 42 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-31. SCHEMATIC DIAGRAM — MIC SECTION — R1418 R1417 R1416 RV1402 RV1400 RV1401 C1407 C1406 JR1417 C1409 C1404 R1460 C1403 D1400 C1408 C1410 C1405 R1461 C1461 TP1408 J1450 R1459...
  • Page 43 HCD-GNZ77D/GNZ88D 6-32. PRINTED WIRING BOARD — KARAOKE SECTION — • Refer to page 32 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 : Uses unleaded solder. • Semiconductor Location Ref. No. Location D2000 D2001...
  • Page 44 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-33. SCHEMATIC DIAGRAM — KARAOKE SECTION — R2032 R2035 C2015 IC2002(1/2) IC2002(2/2) R2028 R2031 R2034 R2036 R2029 R2030 R2000 C2000 R2001 CN2000 C2007 C2013 C2001 R2010 R2002 IC2001(2/2) IC2001(1/2)
  • Page 45 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-34. PRINTED WIRING BOARD — VIDEO SECTION — • Refer to page 32 for Circuit Boards Location. : Uses unleaded solder. (Page 36) DMB15 BOARD CN301 (Page 59) MIC BOARD NO1400...
  • Page 46 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-35. SCHEMATIC DIAGRAM — VIDEO SECTION — CN1966 IC1801 J1900 C1853 C1867 R1931 FB1971 JR1913 C1854 C1866 R1932 FB1972 C1868 JR1914 C1855 C1865 R1933 FB1973 C1869 C1856 C1870 (Page 38)
  • Page 47 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-36. PRINTED WIRING BOARD — SPEAKER SECTION — • Refer to page 32 for Circuit Boards Location. : Uses unleaded solder. (Page 49) (Page 49) (Page 49) S-MASTER S-MASTER...
  • Page 48 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-37. SCHEMATIC DIAGRAM — SPEAKER SECTION — EP1500 TM1500 CN1700 JW1720 C1722 JW1730 C1723 (Page 51) CN1601 JW1600 C1602 JW1610 C1612 JW1620 C1622 JW1630 (Page 51) C1632 CN1500 JW1500...
  • Page 49 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-38. PRINTED WIRING BOARD — POWER SECTION (HCD-GNZ88D) — • Refer to page 32 for Circuit Boards Location. : Uses unleaded solder. • Semiconductor Location (CHASSIS) Ref. No. Location...
  • Page 50 HCD-GNZ77D/GNZ88D 3 7 6 3 1 5 1 5 0 6-39. SCHEMATIC DIAGRAM — POWER SECTION (HCD-GNZ88D) — EP1102 SW1100 JW1112 C1109 C1110 FH1100 FH1101 C1101 C1115 JW1111 JW1105 TP1101 TP1108 TP1100 LF1101 R1103 TH1100 TP1102 D1100 C1112 F1100 T1100 T6.3AL...
  • Page 51 HCD-GNZ77D/GNZ88D 3 7 63 1515 0 • IC Block Diagrams IC701 BA6956AN (DRIVER Board) IC712 BA6956AN (DRIVER Board) CONTROL LOGIC IC301 AK4358VQ-L (DMB15 Board) (FL) L 13942296513 DATT SDTI4 ROUT1+ SDTI1 (FR) DATT ROUT1- AUDIO SDTI2 INTERFACE LOUT2+ (SL)
  • Page 52 HCD-GNZ77D/GNZ88D 3 7 63 1515 0 • IC Pin Descriptions IC102 CXD9849R (CD/DVD RF AMP, FOCUS/TRACKING ERROR AMP, DVD SYSTEM PROCESSOR, DIGITAL SERVO PROCESSOR) (DMB15 BOARD (3/5)) Pin No. Pin Name Pin Description AGND — Ground pin DVDA AC coupled input path A...
  • Page 53 HCD-GNZ77D/GNZ88D 3 7 63 1515 0 Pin No. Pin Name Pin Description WIDE Wide signal output Volume control signal output MAMUTE MAMUTE signal output to System Controller Not used in this set. (Open) DVDD18 — Power Supply pin (+1.8 V)
  • Page 54 HCD-GNZ77D/GNZ88D 3 7 63 1515 0 Pin No. Pin Name Pin Description DVSS — Ground pin 120, 121 RD 4, 3 Data bus 4, 3 from SD-RAM DVDD18 — Power Supply pin (+1.8 V) 123 to 125 RD 2 to 0...
  • Page 55 HCD-GNZ77D/GNZ88D 3 7 63 1515 0 Pin No. Pin Name Pin Description — Not used in this set. (Open) — Not used in this set. (Open) — Not used in this set. (Open) — Not used in this set. (Open) DAVCC —...
  • Page 56 HCD-GNZ77D/GNZ88D 3 7 63 1515 0 Pin No. Pin Name Pin Description LPFOP Positive output of loop filter amplifier VDD3 Power Supply pin (+3.3 V) — Not used. (Open) — Ground pin — Not used. (Open) — Not used. (Open) RFVDD3 —...
  • Page 57 HCD-GNZ77D/GNZ88D 3 7 63 1515 0 IC401 M30622MEP-A50FPU0 (SYSTEM CONTROL) (MAIN BOARD (1/4)) Pin No. Pin Name Pin Description SW CHANNEL Signal path selection signal for sub woofer channel SELECT “L”: LFE, “H”: Subwoofer out from M61537 SURR CHANNEL...
  • Page 58 HCD-GNZ77D/GNZ88D 3 7 63 1515 0 Pin No. Pin Name Pin Description TM R CDM turning motor control signal output LM F CDM loading motor control signal output LM R CDM loading motor control signal output Dynamic LED drive signal output to the ILLUMINATION 1st indicator and LED ILLUMINATION 1 2nd indicator “H”: LED on...
  • Page 59 HCD-GNZ77D/GNZ88D 3 7 63 1515 0 Pin No. Pin Name Pin Description AVSS — Ground pin AD KEY 1 Key signal input (A/D input) VREF A/D Converter reference voltage input (+3.3 V) AVCC — Power supply pin (+3.3 V) (for A/D conversion) MAIN ON/OFF Main power on/off control signal output “H”: power on...
  • Page 60 HCD-GNZ77D/GNZ88D 3 7 63 1515 0 IC403 BH2210FV-E2 (SIGNAL IN/OUT CONTROL) (MAIN BOARD (2/4)) Pin No. Pin Name Pin Description CTLIO IN/OUT control port (Fixed at “H” in this set.) RESET Reset signal input Serial data clock signal input...

This manual is also suitable for:

Hcd-gnz88d

Table of Contents