Related Manuals for Hitachi NR90AD
Summary of Contents for Hitachi NR90AD
-
Page 1: Handling Instructions
Strip Nailer NR 90AD Read through carefully and understand these instructions before use. Handling instructions... -
Page 2: General Operational Precautions
GENERAL OPERATIONAL PRECAUTIONS SAFETY RULES 1. Operate the power tool safely for correct uses. 1. Always assume that the tool contains fasteners. Do not use the power tool for uses other than those 2. Do not point the tool towards yourself or anyone specified in this instructions. - Page 3 Eye protection can be bought at any hardware store. 12. Do not carelessly place your finger on the trigger. Always wear eye protection while operating this Do not place your finger on the trigger except when tool. Use either eye protection or a wide vision mask actually nailing.
-
Page 4: Name Of Parts
22. A female plug (air socket) should not be used in the body. If a female plug is installed in the body, the compressed air sometimes can not be drawn when the hose is disconnected so avoid this. The tool and air supply hose must have a hose coupling such that all pressure is removed from the tool when the coupling joint is disconnected. -
Page 5: Nail Selection
Check whether or not the push lever works correctly. NAIL SELECTION Also check whether or not any dirt has adhered to the moving parts of the push lever. Choose a suitable nail from Fig. Nails which are not shown Recheck on operational safety. in Fig. - Page 6 CAUTIONS CAUTION To prevent unintentional operation, never touch the Excercise care when nailing corners of lumber. When trigger or place the top end of the push lever on a continuous nailing corners of lumber, a nail may go work bench on floor. Also, never face the nail outlet astray or break through the corner.
-
Page 7: Inspection And Maintenance
SAE10W, SAE20W CAUTION Repair, modification and inspection of Hitachi Power ISO VG32 – 68 Tools must be carried out by an Hitachi Authorized Turbine oil (#90 – #180) Service Center. This Parts List will be helpful if presented with the tool to the Hitachi Authorized Service Center when requesting repair or other maintenance. - Page 9 Item Code Item Code Remarks Remarks Used Used M5 × 12 873-570 P-18 949-765 676-531 884-952 884-964 884-986 M6 × 30 872-654 1AP-10 878-877 884-966 884-951 878-888 I.D. 1.8 884-953 884-965 884-949 884-962 884-947 I.D. 49.4 884-984 884-946 963-837 884-948 I.D.
- Page 12 Hitachi Koki Co., Ltd. Code No. C99124911 N Printed in Japan...