11.3
Set Group code
11.3.1 Enter Group code
Siemens AG
Remember that when using Group codes, the overall security is lowered
CAUTION
because codes can easily be distributed.
NOTE
If you have entered the wrong Axx command (e g in step 3 below) you can abort the command and
exit to Administrator mode by pressing A again.
In parallel with card reading four 4-digit Group codes can be set. Each Group code
needs to be assigned a group number. (1-4)
1.
Press B .
2.
Enter the 6-digit Administrator code. See section 8 Change Administrator
code.
3.
Press A21 .
The buzzer sounds a confirm tune.
4.
Enter the desired 1-digit group number (1-4).
The buzzer sounds a confirm tune.
5.
Enter the desired 4-digit Group code.
The buzzer sounds a confirm tune.
6.
To set another Group code, follow steps 4-5.
Stand-alone mode
25
04.2010