Table of Contents
Advertisement
Available languages
Available languages
Description of Equipment
7.4.1
Antennae
7.5
Power down and activation
7.6
Keypad
10
Siemens AG
The card reader antenna is integrated in the upper part of the keypad, so cards
and other tags should be presented to the keypad.
The network antenna is located in the grey plastic housing on the lower face of the
RF30-EM.
Normal operational use of the RF30-EM will consume power from the batteries.
When the RF30-EM is not in use, the power consumption is reduced to a minimum
to save batteries.
PIR sensor
A passive infra-red (PIR) sensor "wakes up" the reader when it detects a person
close to the RF30-EM. The RF30-EM is thus ready to provide access to the door
via card and/or Group code/PIN. See section 10.4 Adjust the PIR sensor.
1
2
3
Fig. 1
Keypad RF30-EM
Red LED.
Yellow LED.
Green LED.
0-9
Are used for entering codes and/or programming.
A/B
Are used only for programming.
In this manual three symbols illustrate how the LEDs are used:
= OFF
= ON
= Flashing
04.2010
Advertisement
Chapters
Table of Contents
