Setting Up Nokia Ip40 Satellite X; Nokia Ip40 Satellite X To Check Point Smartcenter Fp3/Ng Ai; Setting Up Check Point Smartcenter Fp3/Ng Ai - Nokia IP40 User Manual
Hide thumbs
Also See for IP40:
- User manual (194 pages) ,
- Quick start manual (4 pages) ,
- Quick start manual (4 pages)
Table of Contents
Advertisement
14
Working with VPNs
3. Configure a rule, set with the following parameters:
Source: internal network of the IP40 DAIP object
Destination: internal network of FP3
Select Encrypt
4. Push the policy on to the FP3 firewall object.
5. Import the certificate to the computer to which the IP40 Satellite X is connected.
Use FTP or a floppy disk to import the certificate.
Setting Up Nokia IP40 Satellite X
Configure a VPN tunnel between an IP40 Satellite X and Check Point FP3 server.
To set up Nokia IP40 Satellite X
1. On the IP40 GUI, click VPN.
The VPN page appears.
2. Click Certificates.
On the Certificates page, browse for the certificate.
Click Upload.
3. Enter the Certificate pass phrase that you use to create the certificate.
4. Click OK.
When you create a VPN connection between IP40 Satellite X and Check Point FP3, select Use
Certificate instead of Use Shared Secret.
Nokia IP40 Satellite X to Check Point SmartCenter FP3/NG AI
You can use Nokia IP40 Satellite X as a VPN server to establish a VPN connectivity with
SmartCenter FP3/NG AI server by using VPN-1 Edge/Embedded gateway or using VPN-1
Edge/Embedded ROBO gateway in case of Smart LSM (VPN Star Community).
Setting Up Check Point SmartCenter FP3/NG AI
Configure the Check Point SmartCenter FP3 for a VPN connection with Nokia IP40 Satellite X.
To set up Check Point SmartCenter FP3/NG AI
1. Define a VPN-1 Edge/Embedded Gateway.
2. Create a new Star Community.
3. Configure a VPN central gateway as the FP3 firewall object.
4. Configure VPN-1 Edge/Embedded gateway as a Satellite X gateway.
5. Define access rules with the following parameters:
192
Nokia IP40 Security Platform User's Guide v1.1
Advertisement
Table of Contents
