Configuring Remote Access Vpns - Nokia IP40 User Manual
Hide thumbs
Also See for IP40:
- User manual (194 pages) ,
- Quick start manual (4 pages) ,
- Quick start manual (4 pages)
Table of Contents
Advertisement
14
Working with VPNs
Note
To allow authenticated users to access your internal network without restriction, and
bypass NAT, select Unrestricted access.
Configuring Remote Access VPNs
The following sections describe about how to configure a remote access VPN and VPN site.
To configure a remote access VPN
1. Click VPN in the main menu, and click the VPN Sites tab.
2. Click New Site at the bottom of the page.
3. The IP40 VPN site wizard appears.
If you select Remote Access VPN, the VPN Network Configuration dialog box appears.
To configure a remote access VPN site
1. Enter the IP address of the VPN gateway.
2. Do one of the following:
Note
You can download the network configuration only if you are connecting to a Check Point
VPN-1 or Nokia IP40 Security Platform.
This option increases network security. For example, if your VPN consists of a central office
and a number of remote offices, and the remote offices are allowed to access the Internet
resources through the central office only, you can choose route all traffic from the remote
offices through the central office.
Note
You can configure only one VPN site to route all traffic.
3. Click Next.
The following happens in this order:
164
To obtain the network configuration by downloading it from the VPN site, select
Download Configuration. This option automatically configures your VPN settings by
downloading the network topology definition from the VPN server.
To provide the network configuration manually, select Specify Configuration.
To route all network traffic through the site, including Internet traffic, select Route All
Traffic in the GUI wizard.
Nokia IP40 Security Platform User's Guide v1.1
Advertisement
Table of Contents
