TROUBLESHOOTING
If the starter motor will not operate.
Check
1. Battery
2. Starter motor
3. Starter relay
4. Engine starter switch
5. Wiring
NOTE:
Use the following special tool(s) in this
troubleshooting.
Pocket tester:
90890-03112
1. Battery
Battery condition
●
Refer to the CHAPTER 3.
Open circuit voltage
12.8 V or more at 20 C°
OK
NO
Clean the battery terminal.
●
Recharge or replace the
●
battery.
STARTING SYSTEM
2. Starter motor
Connect the positive battery terminal
●
starter motor lead
WARNING
A wire that is used as a jumper lead must
●
have at least the same capacity or more
as that of the battery lead, otherwise the
jumper lead may burn.
This check is likely to produce sparks,
●
therefore make sure nothing flammable is
in the vicinity.
Dose the starter motor turn ?
●
YES
6-4
ELEC
and
with a jumper lead
.
Red
Red
Black
Black
NO
Repair or replace the
starter motor.