HP StoreEver MSL2024 User And Service Manual page 173
Hide thumbs
Also See for StoreEver MSL2024:
- Quickspecs (26 pages) ,
- Quickspecs (25 pages) ,
- Quickspecs (30 pages)
Table of Contents
Advertisement
Table 37 Sub-codes for error BE
Sub-code
Message
51
Extender personality not
matching.
52
Lower library personality not
matching.
53
Extender firmware not matching.
54
Lower library firmware level not
matching.
55
Incompatible height form factor
for master library.
56
Incompatible height form factor
for lower library.
57
Extender firmware corrupted
Table 38 Sub error codes related to robotics errors during movement to extender position
Sub-code
F0
F1
F2
F3
F4
F5
F6
F7
F8
F9
FA
FB
Cause
The Extender is not an HPE
MSL Library Extender.
The lower library is not an
MSL2024 or MSL4048 tape
library.
The firmware version of the
Extender is not compatible with
the firmware version of the
master library.
The firmware versions of the
master library and lower library
are not compatible with each
other.
The master library is not an
MSL4048 or MSL8096.
The lower library is not an
MSL2024 or MSL4048.
The firmware upgrade failed,
possibly because of a power
failure during the upgrade
operation.
Message
Invalid stack configuration (1U cannot be the master or lower library)
Error during elevator home movement
Error during sled movement to home sensor
Error during sled movement to extender position
Error during rotation movement to extender position
Error during elevator movement to extender position
Error during sled movement to rotate position
Error during rotation movement
Error cartridge present sensor during cartridge transfer from robotics to extender carrier
(and reverse)
Cartridge present sensor deviates from expected parameter
Error during first slider movement (movement with opened gripper) from/to extender
position
Error during first gripper movement (open gripper) from/to extender position
Solution
Verify that the Extender is a
HPE MSL Library Extender.
Verify that the lower library is
an MSL2024 or MSL4048 tape
library.
Update the extended library
firmware with the current
firmware bundle, which will
update both libraries and the
Extender with compatible
firmware versions.
Disable extended mode,
update both libraries to the
most recent released versions,
and then re-enable extended
mode.
Verify that the master (top)
library is an MSL4048 or
MSL8096.
Verify that the lower library is
an MSL2024 or MSL4048.
Power cycle the master library.
(The master library will attempt
to download the Extender
firmware to the Extender when
the master library is powered
on.)
Error codes 173
Advertisement
Table of Contents
