Canopy T1/E1 Multiplexer
Desired Action
Get T1 line length
Get T1 line code
Get E1 line code
Issue 3
Syntax, Response, and Description
Enter get line [1/2/3/4] length
where
[1/2/3/4] represents T1 ports 1 through 4.
The system responds
Line [1/2/3/4] length
1.2 dB; 266-399 / 1.8 dB; 399-533 / 2.4 dB; 533-655
/ 3.0 dB]
Gets the T1 line length. The units are in feet in decibels. If the incorrect
line length is selected, the result could be decreased T1 quality or echo
on voice lines.
Enter get code line [1/2/3/4]
where
[1/2/3/4] represents T1 ports 1 through 4
The system responds
Line [1/2/3/4] code [B8ZS/AMI]
Gets the T1 line code. If the line code does not match, Bipolar
Violations (BPVs) will occur.
Enter get code line [1/2/3/4]
where
[1/2/3/4] represents E1 ports 1 through 4
The system responds:
Line [1/2/3/4] code [HDB3/AMI]
Gets the E1 line code. If the line code does not match, Bipolar
Violations (BPVs) will occur.
Page 68 of 73
T1/E1 Multiplexer FPGA Version 3.4
[0-133 / 0.6 dB; 133-266 /
September 2004