Protect Your Installation - Motorola PTP 300 Deployment Manual

Motorola network router user manual

Hide thumbs Also See for PTP 300:

Table of Contents

EMD (Lightning)

The recommendations in this section and in the user manual, when followed correctly,

give the installation the best protection from the harmful effects of

The recommended components for protecting an installation are:

•

Solid screen Ethernet cable: Superior Essex type BBDGE.

•

Surge Arrestor: Type PTP-LPU - 2 per link – Part Number 2978

•

Grounding Stake (if no suitable grounding point can be found).

•

Minimum 8 AWG Grounding Cable

NB: There may be a local regulatory requirement to cross bond the CAT 5e cable to

the mast at intervals as regular as every 10 metres (33 feet). This can be achieved

using an Andrew grounding assembly type 223158 or similar.

We recommend that the practices and procedures detailed in the Motorola manual R56 "STANDARDS AND

GUIDELINES FOR COMMUNICATION SITES" (68P81089E50) be applied to all new site build activities. For a

copy on the manual please see your local Motorola representative. The manual can be downloaded from the

Motorola Intranet site

http://compass.mot.com/go/190860869

Protect Your Installation

Attention

ElectroMagnetic Discharge

Protect Your Installation!

damage is not covered under warranty

However 100% protection is not implied or possible

(Lightning)

EMD

Table of Contents

Ptp 500