Fit The Sunshield (Mic612) - Bosch MIC612 Operation Manual
Hide thumbs
Also See for MIC612:
- Operation manual (94 pages) ,
- Installation manual (80 pages) ,
- Brochure & specs (9 pages)
Table of Contents
Advertisement
28
en | Fit the Sunshield (MIC612)
6
Fit the Sunshield (MIC612)
The MIC612 Sunshield is designed to provide additional protection against direct solar
radiation. It is a two-part molding and comes supplied with eight (8) stainless steel stand-offs
and eight (8) stainless steel M3 washers and retaining screws.
The MIC612 stand-offs are slightly shorter than those for the MIC412 and have gnarled
threads at one end. The MIC412 stand-offs are slightly longer and are smooth at one end.
Stand-off for MIC612
The MIC612 Sunshield is designed to provide additional protection against direct solar
radiation. It is a two-part molding and comes supplied with eight (8) stainless steel stand-offs
and eight (8) stainless steel M3 washers and retaining screws.
Caution!
DO NOT REMOVE the lid from the camera, and do not back drive the pan or tilt axis manually.
!
Doing so will void the warranty. Back driving may also strip teeth off the internal gears.
Figure 6.1: Graphical depiction of sunshield assembly
1
2
3
4
2016.03 | 2.1 | F.01U.249.416
Stand-off, stainless steel
Sunshield
M3 x 10 mm screw, stainless steel, Pozidriv with pan head
M3 washer, stainless steel
Operation Manual
Stand-off for MIC412
MIC612 Thermal Camera
Bosch Security Systems
Advertisement
Table of Contents
