2.2.1.4.
CIS (Contact Image Sensor) Assembly
(15) Remove the Snap Ring (H7).
(16) Remove the Feed Lever (411).
(17) Remove the Feed Roller Shaft Assembly.
(18) Remove the Feed Roller (419).
Note:
When reinstalling, make sure that the Roller
Assembly is properly placed on the ADF Unit.
(1) Remove 6 Silver Screws (S6).
(2) Remove the Left Cover (612).
(3) Remove 2 Silver Screws (S6).
(4) Remove the Upper Left Cover (329).
34