Table of Contents
Advertisement
(4) Remove 2 Silver Screws.
(5) Remove the Lower Right Rear Cover first.
(6) Remove 6 Silver Screws.
(7) Remove the Right Cover.
(8) Loosen 5 Screws.
(9) Remove the SC Cover.
(10) Install the Hardware Key into one of the two
available connectors (CN516 or CN517) on the
SC PC Board.
Note:
The connector is keyed, to prevent damage to
the SC PC Board, install the Hardware Key as
illustrated. Do not force the Hardware Key into
the connector if facing the wrong way.
241
Advertisement
Table of Contents
Troubleshooting
