Positioning The Pick-Up Rollerreleasing Solenoid (Sl9, Sl10); Releasing The Lifter; Left/Right Registration - Canon 1000 Service Manual

Color laser copier

Hide thumbs Also See for 1000:

Table of Contents

6. Positioning the Pick-Up Roller

Releasing Solenoid (SL9, SL10)

Install the solenoid so that the pick-up roller

arm [1] butts against the upper stay [2] when the

plunger of the solenoid is pushed in.

Figure 4-314B

If the lifter [1] is up, push down the lifter

releasing arm [2] to lower it.

Figure 4-315B

CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)

4. MECHANICAL SYSTEM

Select 'ATTRACT' under 'FUNC' in service

Select the pick-up assembly using 'ATT-

Press 'ATT-ON'.

(Paper will be picked up automatically and

remain attracted to the transfer belt.)

At this time, make adjustments so that the

distance L between the paper edge (front of

paper) [1] and the front plate [3] of the transfer

unit [2] is 74.7 ±0.5 mm. (If LTR, 83.7 ±0.5

Slide out the duplexing unit (if cassette 1) or

the cassette 1 (if cassette 2).

Loosen the screw [4], and adjust the position

of the cassette hook plate [5] as indicated.

Figure 4-316B

Show Quick Links

Chapters

Table of Contents