4. MECHANICAL SYSTEM
II. DRIVE SYSTEM
A. Drum Drive System
1. Removing the Drum Drive
Assembly
1)
Remove the rear cover 2.
2)
Remove the two screws [1] each, and remove
the two fly wheels [2].
[1]
Figure 4-201A
3)
Slide out the process unit.
4)
Remove the two screws [3] each, and remove
the drum heater terminal cover [4].
[3]
Figure 4-202A
4-10
COPYRIGHT © 2001 CANON INC.
[1]
[2]
[4]
5)
Remove the two screws [5] each, and loosen
the tensioner plate [6] (four points); then,
detach the four belts from the drum drive
assembly pulleys.
[5]
6)
Disconnect the two connectors [7], and four
screws [8]; then, remove the drum drive
assembly [9].
[7]
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
[6]
Figure 4-203A
[8]
[8]
Figure 4-204A
[9]