Advertisement
2.1
Setup Procedure
[A] LDAP server confirmation
The service technician confirms a user if the attribute name used for card authentication (authentication
ID) on LDAP server is correct. The confirmed attribute name should be set on this equipment in proce-
dure [K].
Attribute Name
[B] Authentication method confirmation
The user accesses TopAccess and confirms if "Enable" of "Department Code" and "User Authentica-
tion" is selected. The user also confirms if either of "Windows Domain Authentication" or "LDAP Authen-
tication" of "Authentication" is selected.
Note that the card authentication is disabled if "Local Authentication" of "Authentication" is selected.
Reference:
Confirmation procedure in TopAccess followed by users
(For the detailed procedure, refer to the TopAccess Guide.)
1) Access the equipment with the e-BRIDGE ID Gate installed from the web browser.
2) Click the User Management tab and the Authentication menu.
3) Enter the administrator password and click "Login".
4) Confirm if "Enable" of "Department Code" in "Department Setting" is selected.
5) Confirm if "Enable" of "User Authentication" in "User Management Setting" is selected.
6) Confirm if either of "Windows Domain Authentication" or "LDAP Authentication" of "Method" in
"User Management Setting" is selected.
7) Log out of TopAccess.
[C] Hardware installation
The service technician installs the e-BRIDGE ID Gate following the co-packed Unpacking Instruction.
[D] System setting (08-1772)
The service technician sets the codes shown below to enable the e-BRIDGE ID Gate features.
08-1772
Uses Card ID as an authentication ID.
Setting code (8 digits)
For the details of the setting codes, refer to the e-BRIDGE ID Gate setting code list.
P. 3-1 "3. e-BRIDGE ID GATE SETTING CODE LIST"
<Procedure>
1) Turn the power of the equipment ON while pressing the digital keys [0] and [8] simultaneously.
2) Key in "1772", and then press the [START] button.
3) Key in the setting code, and then press the [ENTER] button on the touch panel.
4) Shut down the equipment.
© February 2007 TOSHIBA TEC CORPORATION All rights reserved
Contents
00040002
INSTALLATION AND SETTINGS OF e-BRIDGE ID GATE
2 - 3
2
KP-2004
Advertisement
